Table of Contents
Advertisement
3 AWARD BIOS SETUP UTILITY
Frequency/Voltage Control
Auto Detect DIMM/PCI Clk
When enabled, the system will automatically send clock signals to exiting DIMM
or PCI devices.
Spread Spectrum Modulated
Leave this field in its default setting. Do not alter this setting unless advised by
an engineer or technician.
Clock by Slight Adjust
Do not change this field.
Load Fail-Safe Defaults
This option loads the troubleshooting default values permanently stored in the
ROM chips. These settings are not optimal and turn off all high performance
features. You should use these values only if you have hardware problems.
Highlight this option in the main menu and press <Enter>. The message below
will appear.
Load Fail-Safe Defaults (Y/N)? N
If you want to proceed, type <y> and press <Enter>. The default settings will
be loaded.
36
MC Series Computer Products
MAN-0CM33-001
Advertisement
Table of Contents
