Mitsubishi Electric CM33-TL User Manual page 37

IRQ Resources
Move the cursor to this field and press <Enter>. The "IRQ-3" to "IRQ-15" fields
will appear. Set each system interrupt to either Legacy ISA or PCI/ISA PnP.
PCI/ISA PnP
Legacy ISA
DMA Resources
Move the cursor tot his field and press <Enter>. The "DMA-0" to "DMA-7" fields
will appear. Set each DMA address to either Legacy ISA or PCI/ISA PnP.
PCI/ISA PnP
Legacy ISA
PCI/VGA Palette Snoop
This field determines whether the MPEG ISA/VESA VGA cards can work with
PCI/VGA or not. The default value is Disabled.
Enabled
Disabled
Assign IRQ for VGA
When Enabled, the system automatically assigns an IRQ for the VGA card
installed. Your VGA card will need an IRQ only when using the video capture
function of the card. If you are not using this function and a new device re-
quires an IRQ, you can set this field to Disabled. The IRQ (previously occu-
pied by the VGA card) will be available for your new device.
Note: When disabled a "Yellow" mark will appear in Windows
Manager.
Assign IRQ for USB
When Enabled, the system automatically assigns an IRQ for the USB device
connected to your system. However, if you are not using USB devices and an
ISA slot requires an IRQ, set this field to Disabled. The IRQ previously occu-
pied by the USB device will be available for the ISA slot.
Note: When disabled a "Yellow" mark will appear in Windows
Manager.
MAN-0CM33-001
3 AWARD BIOS SETUP UTILITY
For devices compliant with the PCI bus architecture.
For devices compliant with the original PC AT bus
specification.
For devices compliant with the PCI bus architecture.
For devices compliant with the original PC AT bus
specification.
MPEG ISA/VESA VGA cards work with PCI/VGA.
MPEG ISA/VESA VGA cards do not work with PCI/VGA.
MC Series Computer Products
95's Device
®
95's Device
®
33