Removing The Rear Wheel (Disc); Checking The Rear Wheel; Checking The Rear Wheel Drive Hub; Adjusting The Rear Wheel Static Balance - Yamaha 2009 XP500Y TMAX Service Manual

EAS22040

REMOVING THE REAR WHEEL (DISC)

1. Stand the vehicle on a level surface.
EWA13120
WARNING
Securely support the vehicle so that there is
no danger of it falling over.
TIP
Place the vehicle on the centerstand so that the
rear wheel is elevated.
2. Remove:
• Rear brake caliper
TIP
Do not apply the brake lever when removing the
brake caliper.
EAS22090

CHECKING THE REAR WHEEL

1. Check:
• Wheel axle
Refer to "CHECKING THE FRONT WHEEL"
on page 4-11.
2. Check:
• Tire
• Rear wheel
Damage/wear → Replace.
Refer to "CHECKING THE TIRES" on page
3-27 and "CHECKING THE WHEELS" on
page 3-29.
3. Measure:
• Radial wheel runout
• Lateral wheel runout
Refer to "CHECKING THE FRONT WHEEL"
on page 4-11.
Radial wheel runout limit
1.0 mm (0.04 in)
Lateral wheel runout limit
0.5 mm (0.02 in)
EAS4B51012

CHECKING THE REAR WHEEL DRIVE HUB

1. Check:
• Rear wheel drive hub "1"
Cracks/damage → Replace.
EAS22150
ADJUSTING THE REAR WHEEL STATIC
BALANCE
TIP
• After replacing the tire, wheel or both, the rear
wheel static balance should be adjusted.
• Adjust the rear wheel static balance with the
brake disc and rear wheel drive hub installed.
1. Adjust:
• Rear wheel static balance
Refer to "ADJUSTING THE FRONT WHEEL
STATIC BALANCE" on page 4-12.
EAS4B51013

INSTALLING THE REAR WHEEL (DISC)

1. Install:
• Rear wheel drive hub
• Rear brake disc
Rear wheel drive hub bolt
69 Nm (6.9 m·kg, 50 ft·lb)
LOCTITE®
Rear brake disc bolt
18 Nm (1.8 m·kg, 13 ft·lb)
LOCTITE®
TIP
Tighten the brake disc bolts in stages and in a
crisscross pattern.
LT
2. Check:
• Rear brake disc
Refer to "CHECKING THE REAR BRAKE
DISC" on page 4-36.
4-17
REAR WHEEL
1