Table of Contents
Advertisement
Basic manual recording
Information on normal recording is provided bolow. Before
starting recording, recording settings must be checked.
After checking the settings of "HDD REPEAT REC MAIN",
"HDD REPEAT REC SUB" in the <HDD SETTINGS>
screen (
see page 53), the REC mode settings are
made.
Settings here are for normal recording only. For
timer recording, settings must be made on the
<TIMER PROGRAM SETTINGS> screen (
page 50).
Setting the recording interval and recording
picture quality for normal recording
To perform normal recording, "PPS" and "GRADE" must
be set for each camera.
Setting of "PPS" ( default : "1.875P" )
"3.75P", "1.875P", "1.25P", "0.938P", "0.75P",
"0.625P", "0.375P", "0.25P", "0.125P", "0.063P",
"0.031P", "0.016P", "- - - - - -"
"- - - - - -" : Indicates that the camera is not active
and recording cannot be performed with this cam-
era.
Available recording intervals will vary according
to the number of cameras operating or ALARM RE-
CORDING settings (
plays will be according to the chart.
Setting of "GRADE" ( default : "STD" )
"SUPER", "HIGH", "STD"(STANDARD), "BASIC",
"LONG"
Example : Set "PPS" of camera number "
and "GRADE" to "HIGH" for normal recording.
1. Press the SET UP button to display the <SETTINGS> screen.
2. Turn the JOG dial to move the cursor to "RECORD
SETTINGS" and turn the SHUTTLE ring clockwise.
• The <RECORD SETTINGS> screen appears.
<RECORD SETTINGS>
>>ALARM SETTING
RECORD SETTING
ALARM REC DURATION
MOTION DET REC
ARCHIVE OVERWRITE
ARCHIVE MEDIA AUTO EJECT
3. Turn the JOG dial to move the cursor to "RECORD
SETTING" and then turn the SHUTTLE ring clockwise.
• The <RECORD SETTING> screen appears.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Basic Operations
see
see page 47). Interval dis-
" to "0.25P"
1
5S
ALARM
OFF
OFF
<RECORD SETTING> 1/2
Camera selection during alarm recording
<RECORD SETTING>
NO
PPS
GRADE A-PPS
1
1.875P STD
2
1.875P STD
3
1.875P STD
4
1.875P STD
5
1.875P STD
6
1.875P STD
7
1.875P STD
8
1.875P STD
9
1.875P STD
NEXT PAGE
<RECORD SETTING> 2/2
<RECORD SETTING>
NO
PPS
GRADE A-PPS
>>
10
1.875P STD
11
1.875P STD
12
1.875P STD
13
1.875P STD
14
1.875P STD
15
1.875P STD
16
1.875P STD
PRE ALARM REC
<ESTD REC>
CAUTION : For <ESTD REC>,
"Continuous recording time table", pages 92, 93.
About <ESTD REC >
• The estimated recordable time is displayed as <ESTD REC>
depending on the "PPS" and "GRADE" settings. (The time
will not change when changing the alarm recording settings.)
The RECORD SETTING consists of 2 pages. The
next page appears when select "NEXT PAGE" (turn
the SHUTTLE ring clockwise) as shown below .
4. Turn the JOG dial to move the cursor to "
the SHUTTLE ring clockwise.
• The "PPS" setting reverses in color.
<RECORD SETTING>
NO
PPS
GRADE A-PPS
1
1.875P
STD
2
1.875P STD
3
1.875P STD
4
1.875P STD
5
1.875P STD
6
1.875P STD
7
1.875P STD
8
1.875P STD
9
1.875P STD
NEXT PAGE
5. Turn the SHUTTLE ring clockwise again.
• The background of the "PPS" setting turns red and flashes.
<RECORD SETTING>
NO
PPS
GRADE A-PPS
1
1.875P STD
2
1.875P STD
3
1.875P STD
4
1.875P STD
5
1.875P STD
6
1.875P STD
7
1.875P STD
8
1.875P STD
9
1.875P STD
NEXT PAGE
>>ALARM
A-GRADE
1.875P STD
1.875P STD
1.875P STD
1.875P STD
1.875P STD
1.875P STD
1.875P STD
1.875P STD
1.875P STD
SHUTTLE<<:BACK
ALARM
A-GRADE
1.875P STD
1.875P STD
1.875P STD
1.875P STD
1.875P STD
1.875P STD
1.875P STD
( S )
S
SHUTTLE<<:BACK
D
H
M
see
1
", and then turn
ALARM
A-GRADE
1.875P STD
1.875P STD
1.875P STD
1.875P STD
1.875P STD
1.875P STD
1.875P STD
1.875P STD
1.875P STD
SHUTTLE<<:BACK
ALARM
A-GRADE
1.875P STD
1.875P STD
1.875P STD
1.875P STD
1.875P STD
1.875P STD
1.875P STD
1.875P STD
1.875P STD
SHUTTLE<<:BACK
27
Advertisement
Table of Contents
