Basic Manual Recording - Mitsubishi Electric DX-NT400E Operation Quick Manual

Basic manual recording

Normal recording using manual operation is described
below. Before you start recording, check the settings of
"HDD REPEAT REC MAIN" and "HDD REPEAT REC SUB"
in the <HDD SETTINGS> screen, and then set the
recording settings.
Settings here are for normal recording only. For
timer recording, settings must be made on the
<TIMER PROGRAM SETTINGS> screen.
When you set "SHORT," "MEDIUM," or "LONG"
in the PRE ALARM REC, normal recording cannot
be performed. Set the PRE ALARM REC to "OFF"
to perform normal recording or alarm recording.
When you set "SHORT," "MEDIUM," or "LONG"
in the PRE ALARM REC, it is recommended not to
change the settings in ALARM REC DURATION and
RECORD SETTING. If you change these settings,
the recording may be performed in the previous
settings depending on the timing of the recording.
When you want to change the settings in ALARM
REC DURATION and RECORD SETTING while
setting the PRE ALARM REC to "SHORT,"
"MEDIUM," or "LONG," set PRE ALARM REC to
"OFF" first.
When you set "A-PPS" in the <RECORD
SETTING> screen to "- - - -" for all the cameras, pre-
alarm recording is not performed even if PRE ALARM
REC is set to "SHORT," "MEDIUM," or "LONG." In
this case, normal recording is performed at the
interval which is set in "PPS."
Setting the recording interval and recording
picture quality for normal recording
To perform normal recording, "PPS" and "GRADE" must
be set for each camera.
Number of
operational
cameras
PPS
SHORT
Recording
interval
LONG
Setting of "PPS" (default: "3.125P")
"6.25P," "3.125P," "2.083P," "1.563P," "1.25P,"
"1.042P," "0.781P," "0.625P," "0.25P," "0.125P,"
"0.063P," "0.031P," "- - - - - -"
"- - - - - -": Recording is not performed with camera
set to this item.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• QUICK GUIDE
# 1 # 2 # 3
25P 12.5P 8.33P
12.5P 6.25P 4.165P
8.333P 4.167P 2.777P
6.25P 3.125P 2.083P
5P 2.5P 1.666P
4.167P 2.083P 1.388P
3.125P 1.563P 1.041P
2.5P 1.25P 0.833P
1P 0.5P 0.333P
0.5P 0.25P 0.167P
0.25P 0.125P 0.083P
0.125P 0.063P 0.042P
Available recording intervals vary depending on
the number of cameras operating or ALARM RE-
CORDING settings. See the chart above for the
displaying interval.
Setting of "GRADE" (default: "STD")
"SUPER," "HIGH," "STD"(STANDARD), "BASIC,"
"LONG"
Example: Setting "PPS" of camera number "
and "GRADE" to "HIGH" for normal recording.
1. Press the SET UP button to display the <SETTINGS>
screen.
2. Press the JOG
"RECORD SETTINGS" and then press the ENTER button.
• The <RECORD SETTINGS> screen appears.
<RECORD SETTINGS>
>>ALARM SETTING
RECORD SETTING
ALARM REC DURATION
3. Press the JOG
"RECORD SETTING" and then press the ENTER button.
• The <RECORD SETTING> screen appears.
<RECORD SETTING>
NO
>>
1
2
3
4
ALARM TYPE
PRE ALARM REC
<ESTD REC>
About <ESTD REC>
• The remaining recordable time is displayed as <ESTD REC>
depending on the "PPS" and "GRADE" settings. (This time is
not change when changing the alarm recording settings.)
4. Check that the cursor is positioned at "
# 4 the ENTER button.
• The setting item of "PPS" is highlighted.
6.25P
<RECORD SETTING>
3.125P
NO
1 1
2.083P
2 2
1.563P
3 3
4 4
1.25P
1.042P
5. Press the ENTER button again.
0.781P
• The background of the setting item turns red and flashes.
0.625P
<RECORD SETTING>
0.25P
NO
0.125P
1
2
0.063P
3
4
0.031P
The menu screen is not cleared even when
pressing the SET UP button while the setting item is
flashing.
, buttons to move the cursor to
, buttons to move the cursor to
PPS GRADE A-PPS A-GRADE
3.125P STD 3.125P STD
3.125P STD 3.125P STD
3.125P STD 3.125P STD
3.125P STD 3.125P STD
ALARM CH
CLEAR:BACK
D H M
" and then press
1
PPS GRADE A-PPS A-GRADE
3.125P STD 3.125P STD
3.125P STD 3.125P STD
3.125P STD 3.125P STD
3.125P STD 3.125P STD
PPS GRADE A-PPS A-GRADE
3.125P STD 3.125P STD
3.125P STD 3.125P STD
3.125P STD 3.125P STD
3.125P STD 3.125P STD
" to "1.25P"
1
5S
OFF
15