Table of Contents
Advertisement
Various playback functions
Playing still frames
1. Press the PAUSE button during playback.
• The unit switches to still frame playback. Press the button
again to resume playback.
• If a camera number (1 ~ 16) button is pressed during single
screen still frame playback, the video of the camera number
button pressed will be displayed by searching forward.
Shuttle viewing/direct shuttle viewing
Turning the SHUTTLE ring during still frame playback, play-
back or reverse playback, the playback speed can be
changed.
1. (During shuttle viewing • • • )
Turn the SHUTTLE ring during still frame playback.
• The playback speed depends on the angle the SHUTTLE
ring is turned.
• When letting go of the SHUTTLE ring, the ring will return to
the center and the unit will return to still frame playback.
2
1
1 High-speed rewind (1GB units)
2 Reverse speed search (100MB units)
3 Reverse speed search (10MB units)
4 Reverse speed search (1MB units)
5 Still frame playback
6 Forward speed search (1MB units)
7 Forward speed search (10MB units)
8 Forward speed search (100MB units)
9 High-speed fast forward (1GB units)
2. (During direct shuttle viewing • • • )
Turn the SHUTTLE ring during playback or reverse playback.
• The playback speed depends on the angle the SHUTTLE
ring is turned.
• When letting go of the SHUTTLE ring, the ring will return to
the center and the unit will return to still frame playback. (The
unit will not return to playback or reverse playback.)
Shuttle hold
The playback speed can be maintained even when letting
go of the SHUTTLE ring during shuttle viewing.
1. Press the PAUSE (SHUTTLE HOLD) button while holding
the SHUTTLE ring in angle during shuttle playback.
2. Let go of the SHUTTLE ring.
• The playback speed is maintained.
• To cancel shuttle hold, press the PAUSE button. The unit
will switch to still frame playback.
Frame-by-frame playback
1. Turn the JOG dial during still frame playback.
• Clockwise : Forward frame feeding.
• Counterclockwise : Reverse frame feeding.
• Clockwise and hold : Continuous forward frame feeding.
• Counterclockwise and hold : Continuous reverse frame
feeding.
• When turning of JOG dial is stopped : Unit returns to still
frame playback.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
5
4
6
3
7
8
9
During frame advancement in the single screen
mode, the frame advancement operation may not
operate correctly when the JOG dial is turned too
fast since frame advancement is performed while
searching the video of the display camera number.
Reverse playback
1. Press the REV. PLAY (REVERSE PLAYBACK) button while
playback is stopped.
• Playback will be made in the reverse direction. Playback
will stop when press the STOP button.
When reverse playback is performed first after
turning the power on, the last recorded video will be
played back in reverse first.
High-speed fast-forward/high-speed rewind
1. Turn the SHUTTLE ring for more than 1 second while
playback is stopped.
• Clockwise for more than 1 second :
Will activate High-speed fast-forward playback (1GB units).
• Counterclockwise for more than 1 second :
Will activate High-speed rewind playback (1GB units).
• Press the STOP button: Playback is stopped.
For viewing of the most recent recording, select
"OFF" for the "HDD REPEAT PLAY" setting and turn
the SHUTTLE ring to the right during stop. After stop
at the most recent recording, reverse playback will
be started when the REV.PLAY button is pressed.
For viewing of the oldest recording, select "OFF" for
the "HDD REPEAT PLAY" setting and turn the SHUT-
TLE ring to the left during stop. After stop at the old-
est recording, playback will be started when the
PLAY button is pressed.
During high-speed fast-forward/rewind, the current
position is displayed on the bottom or top of the screen. S
(start) and E (end) indicate the beginning and end of the HDD
space and "I" indicates the current position.
current position
S
Changing playback intervals
Although, playback and reverse playback use the same
interval as that for recording, it is possible to change the
playback interval. This function is useful for slow-motion
playback of fast-moving footage, or quick playback of ex-
tensive footage without skipping frames.
1-1. (To play back recording with fast motion • • • )
Press the REV. PLAY (REVERSE PLAYBACK) button during
playback or reverse playback.
• Playback or reverse playback will be made at 0.125P intervals
per camera.
1-2. Press the PLAY button.
• The playback interval is changed to a faster setting (0.25P,
0.5P, and so on) each time the button is pressed.
2-1. (To play back video recorded using extended recording
intervals fast • • • )
Press the PLAY button during playback or reverse playback.
• Playback or reverse playback will be made at 60P intervals
per camera.
E
73
Advertisement
Table of Contents
