Playback; Basic Playback Procedure; Selecting An Hdmi Output Jack - Yamaha Aventage RX-A1050 Owner's Manual

AV
1 2 3 4
5 6 7 V-AUX
AUDIO
Input selection keys
1 2 3 PHONO
TUNER BLUETOOTH USB NET
MAIN MAIN ZONE 2 ZONE 2 PARTY PARTY HDMI OUT
HDMI OUT
SCENE SCENE
1 1 2 2 3 3 4 4
MUTE
BD/DVD BD/DVD TV TV NET NET RADIO RADIO
VOLUME
PROGRAM PROGRAM MUTE VOLUME
ON SCREEN
TOP MENU TOP MENU POP-UP/MENU POP-UP/MENU
ON
OPTION OPTION
SCREEN
Cursor keys
ENTER
ENTER
RETURN RETURN DISPLAY DISPLAY
BAND BAND
MODE MODE
TUNING TUNING PRESET PRESET
SUR. DECODE SUR. DECODE STRAIGHT STRAIGHT
MOVIE MOVIE MUSIC MUSIC
ENHANCER ENHANCER PURE DIRECT PURE DIRECT
INFO INFO SLEEP SLEEP
1 1 2 2 3 3 4 4
5 5
6 6 7 8 8
9 9 0 0 MEMORY MEMORY ENT ENT

PLAYBACK

Basic playback procedure

1
Turn on the external devices (such as a TV or
BD/DVD player) connected to the unit.
2
Use the input selection keys to select an input
source.
3
Start playback on the external device or select a
radio station.
Refer to the instruction manual for the external device.
For details on the following operations, see the
corresponding pages.
• Listening to FM/AM radio (p.65)
• Playing back music via Bluetooth (p.69)
• Playing back iPod music (p.70)
• Playing back music stored on a USB storage device (p.73)
• Playing back music stored on media servers (PCs/NAS)
(p.76)
• Listening to Internet radio (p.80)
• Playing back music with AirPlay (p.83)
4
Press VOLUME to adjust the volume.
• To mute the audio output, press MUTE. Press MUTE again to unmute.
• To adjust the treble/bass settings, use the "Option" menu or
TONE/BALANCE on the front panel (p.98).
On-screen input selection
a Press ON SCREEN.
b Use the cursor keys to select "Input" and press ENTER.
c Use the cursor keys to select the desired input source and
press ENTER.

Selecting an HDMI output jack

1
Press HDMI OUT to select an HDMI OUT jack.
Each time you press the key, the HDMI OUT jack to be
used for signal output changes.
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
IN OUT 1 OUT 2
ENHANCER
OUT 1+2
OUT 1
OUT 2
Off
• You can also select an HDMI output jack by selecting a scene (p.57).
• When "OUT 1+2" is selected, the unit outputs video signals at the highest
resolution supported by both TVs (or projectors) connected to the unit. (For
example, if you have connected a 1080p TV to the HDMI OUT 1 jack and a 720p
TV to the HDMI OUT 2 jack, the unit outputs 720p video signals.)
• If the HDMI OUT 2 jack is assigned to Zone2 ("HDMI OUT2 Assign" (p.125)), you
can turn on/off each zone by pressing HDMI OUT repeatedly.
56
En
HDMI OUT Sel.
MUTE VOLUME
ZONE ZONE ZONE
ADAPTIVE
2 3 4 OUT 1+2
PL L C
SLEEP
SL SW1 SW
3
HD
PL SBL SB
Outputs the same signal at both the HDMI OUT 1
and HDMI OUT 2 jacks.
Output the signals at the selected HDMI OUT jack.
Does not output the signals at the HDMI OUT jacks.
DRC
R PR
SW2 SR
SBR PR