Test Tone - Yamaha Aventage RX-A1050 Owner's Manual

■
Parametric EQ
Adjusts the tone with an equalizer.
Settings
Select this option when you want to adjust the equalizer manually.
Manual
For details, see "Manual equalizer adjustment".
YPAO:Flat Adjusts individual speakers to achieve the same characteristics.
Adjusts individual speakers to achieve the same characteristics as the
YPAO:Front
front speakers.
YPAO:Natural Adjusts all speakers to achieve a natural sound.
Through Does not use the equalizer.
• "YPAO:Flat", "YPAO:Front", and "YPAO:Natural" are available only when the measurement results of "Auto
Setup" have already been saved (p.39). Press ENTER again to view the measurement results.
■
Manual equalizer adjustment
1
Set "Parametric EQ" to "Manual" and press ENTER.
2
Press ENTER again to enter the edit screen.
3
Use the cursor keys to select a speaker and press ENTER.
• To restore the default settings for all speakers, select "PEQ Data Clear" and then "OK".
• To copy the parametric equalizer values acquired with "Auto Setup" (p.39) to the "Manual" fields for
fine adjustment, select "PEQ Data Copy" and then an equalizer type.
4
Use the cursor keys (e/r) to select a center frequency from the 7 preset bands
(4 for subwoofer) and the cursor keys (q/w) to adjust the gain.
Setting range
Gain: -20.0 dB to +6.0 dB
5
To fine-adjust the center frequency or Q factor (bandwidth), press ENTER
repeatedly to select an item.
Frequency: Use the cursor keys (e/r) to adjust the center frequency of the selected
band and the cursor keys (q/w) to adjust the gain.
Q: Use the cursor keys (e/r) to adjust the Q factor (bandwidth) of the selected band and
the cursor keys (q/w) to adjust the gain.
Setting range
Center frequency: 31.3 Hz to 16.0 kHz (31.3 Hz to 250.0 Hz for subwoofer)
Q factor: 0.500 to 10.080
6
To exit from the menu, press ON SCREEN.
■

Test Tone

Enables/disables the test tone output. Test tone output helps you to adjust the speaker
balance or equalizer while confirming its effect.
Settings
Off Does not output test tones.
Outputs test tones automatically when you adjust the speaker balance
On
or equalizer.
116
En