Connecting Other Devices; Connecting A Device Compatible With The Trigger Function; Connecting The Power Cable - Yamaha Aventage RX-A1050 Owner's Manual

1 2 3 4 5 6 7 8 9 10 11
6

Connecting other devices

Connecting a device compatible with the trigger function

The trigger function can control an external device in conjunction with operating the
unit (such as powering on/off and input selection). If you have a Yamaha subwoofer that
supports a system connection or a device with a trigger input jack, you can use the
trigger function by connecting the external device to one of the TRIGGER OUT jacks
with a monaural mini-plug cable.
TRIGGER OUT
1–2 jacks
The unit (rear)
TRIGGER
OUT
HDMI (HDCP2.2) NETWORK
WIREL
( 3 NET )
3 AV 4 AV 5 AV 6 AV 7
1
COMPONENT VIDEO TRIGGER 12V 0.1A
P P Y AV 2 P P OUT
B R B R
MAX. TOTAL
B
1
REMOTE RS-232C
12V 0.1A
IN OUT
MAX. TOTAL 2
2
C
P P Y AV 3 P P
B R B R
E OUT
(SINGLE)
1
2
ROUND SUR. BACK SUBWOOFER CENTER
SPEAKERS
SURROUND BACK ZONE 2/F.PRESENCE/ CENTER FRONT
R L R L R L
BI–AMP
EXTRA SP
SINGLE
• You can configure the trigger function settings in "Trigger Output1" and "Trigger Output2" (p.127) in the
"Setup" menu.
System connector
jack
Yamaha subwoofer that
supports a system connection
En
7

Connecting the power cable

Before connecting the power cable (General model only)
Set the switch position of VOLTAGE SELECTOR according to your local voltage.
Voltages are AC 110–120/220–240 V, 50/60 Hz.
• Make sure you set VOLTAGE SELECTOR of the unit BEFORE plugging the power cable into an AC
wall outlet. Improper setting of VOLTAGE SELECTOR may cause damage to the unit and create a
potential fire hazard.
The unit (rear)
NETWORK WIRELESS
( 3 NET )
AV 7
ER
REMOTE RS-232C
IN OUT
CE/ CENTER FRONT
L R L
After all the connections are complete, connect the supplied power cable to the unit
and then to an AC wall outlet.
The unit (rear)
NETWORK WIRELESS
( 3 NET )
AC IN
OTE RS-232C
OUT
CENTER FRONT
R L
36
VOLTAGE SELECTOR
VOLTAGE SELECTOR
AC IN
220V-
240V
110V-
120V
To an AC wall outlet