Connecting Zone2 Speakers - Yamaha Aventage RX-A1050 Owner's Manual

1 2 3 4 5 6 7 8 9 10 11
■
Connecting front speakers that support bi-amp connections
When using front speakers that support bi-amp connections, connect them to the
FRONT terminals and EXTRA SP terminals.
To enable the bi-amp function, configure the "Power Amp Assign" setting in the "Setup"
menu after connecting the power cable to an AC wall outlet (p.38).
The unit (rear)
SURROUND SURROUND BACK
R L R
SINGLE
1
9
4
• The FRONT terminals and EXTRA SP terminals output the same signals.
Caution
• Before making bi-amp connections, remove any brackets or cables that connect a woofer with a
tweeter. Refer to the instruction manual of the speakers for details. If you are not making bi-amp
connections, make sure that the brackets or cables are connected before connecting the speaker
cables.
SPEAKERS
ZONE 2/F.PRESENCE/ CENTER FRONT
L R L R L
BI–AMP EXTRA SP
2
3
9
5
■

Connecting Zone2 speakers

When using Zone2 speakers, connect them to the EXTRA SP terminals.
To utilize the EXTRA SP terminals for Zone2 speakers, configure the "Power Amp
Assign" setting in the "Setup" menu after connecting the power cable to an AC wall
outlet (p.38).
The unit (rear)
SURROUND
R L
1
9 3
4
6
Main zone
• You can also connect Zone2 speakers using an external amplifier (p.87).
25
En
SPEAKERS
SURROUND BACK ZONE 2/F.PRESENCE/ CENTER FRONT
R L R L R L
BI–AMP
EXTRA SP
SINGLE
2
FL FR
9
5
7
Zone2