Page 1
You need to separately prepare the following cables to build the system based on this Th is do c u me n t e x p l ai n s h ow to s e t up a 5 . 1 - o r 7 . 1 - c h an n e l document.
Placing the speakers Set up the speakers in the room by using the following diagram as a reference. For information on other speaker systems, refer to “Owner’s Manual”. 5.1-channel system 7.1-channel system 10°~30° 10°~30° 30 cm (1 ft) or more 10°~30°...
“6 Ω MIN”. For details, see “Setting the speaker impedance” (p.16) in “Owner’s Manual”. • Use a subwoofer equipped with built-in amplifier. MULTI CH INPUT • Remove the power cable of this unit from an AC wall outlet and CENTER ZONE OUT PRE OUT...
Page 4
Connect the surround speakers ( Connect the subwoofer ( ) to the SUBWOOFER (1) jack. ) to the SURROUND ( Connect the surround back speakers ( terminals. ) to the SURROUND BACK ( terminals. MULTI CH INPUT MULTI CH INPUT...
OPTICAL BD/DVD player b Connect the TV and this unit with another HDMI cable. c Connect the TV and this unit with a digital optical HDMI HDMI cable or a stereo pin cable. This connection is required to play back TV audio on this unit.
By using the Yamaha Parametric room Acoustic Optimizer (YPAO) function, this unit automatically detects speaker The following screen appears on the TV. connections and distances from the listening position, and optimizes the speaker settings such as volume balance and acoustic parameters to suit your room.
Page 7
Now optimization of the speaker settings is complete. • Since the YPAO microphone is sensitive to heat, do not place the microphone in any place where it will be subjected to direct sunlight or high temperatures (top of an AV equipment, etc).