Connecting Spool Gun To Millermatic 210 - Miller Electric Spoolmate 3035 Owner's Manual

3-3. Connecting Spool Gun To Millermatic 210

5
6
Rear
Panel
OM-1216 Page 10
1
4
3
2
1 Barbed Fitting
.
If spool gun gas hose is
equipped with a pre-installed
barbed fitting, cut off fitting from
end of hose.
Connect spool gun gas hose to
barbed fitting.
2 Gun Trigger Plug
Insert plug into receptacle labeled
"SPOOL GUN", and tighten
threaded collar.
3 Negative (−) Output Terminal
4 Positive (+) Output Terminal
Connect spool gun weld cable to
positive (+) output terminal.
Close door.
5 Welding Power Source Gas
Hose Connection For Spool
Gun
6 Welding Power Source Gas
Hose Connection For MIG
Gun
Connect gas hose between
regulator/flowmeter gas hose
connection, and fitting on rear of
welding power source.
802 998-C