Toshiba GR200 Series Instruction Manual page 225

Settings using GR-TIEMS
(i)
Figure 3.6-9 shows how to connect the reset signal LED_RST_CMD for the LED-03 logic. The
user can assign a reset signal for the respective LED logics by the drag and drop operation.
The user should also select Latch for the behavior from the pull-down menu.
Set [Behavior] to Latch
Figure 3.6-9 Settings for LED-03 circuit provided by "Setting I/O menu" of GR-TIEMS
Settings using IED screen
(ii)
The operation from the IED screen can also be set. See Chapter
menu
.
- 211 -
6F2S1931 (0.20)
Choose the signal
LED_RST_CMD for the
LED-03 logic
User interface: I/O setting sub-
Centralized GRB200
(Soft: 030, 031, 032, 033, 034)