GE LOGIQ E9 Service Manual page 404

GE
D 5573152-100, R
IRECTION
8-6-3-3 Monitor Arm assembly (Ergotron) replacement - R5.x and later production (cont'd)
Table 8-75
1.
Make sure the Bushing is installed and
positioned in the orientation shown. The
larger hole in the Bushing is to
accommodate the pin.
2.
Remove the Rotation Limit Set Screw from
the Arm Assembly using a 5 mm Hex Key.
8 - 120
. 2
EV
Monitor Arm assembly (Ergotron) installation - R5 and later production
Steps
Section 8-6 - Replacing Top Console Parts
LOGIQ E9 S
ERVICE
Corresponding Graphic
M
ANUAL