Panasonic DVC PRO Studio AJ-D950P Service Manual page 476

Setup menus
USER menu
<VIDEO>
No.
613
614
617
<Note>
When no optional board
(AJ-YA951) has been
installed, setup menus
No. 613 and No. 614
are not displayed.
The underline on the setting item denotes the initial setting.
(continued)
Item Setting
Superimposed Superimposed
No.
display display
VIN SETUP 0000
0001
Pb/Pr OUT 0000
LV 0001
WFM SEL 0000
0001
0002
0003
0004
0005
0006
0007
– E-58 –
THRU
This selects whether the composite signal is to be recorded
with setup or without setup.
CUT
0: When recording signals with no setup.
1: When recording signals with 7.5% setup.
<Notes>
•
This setup menu is not displayed in the 625 mode.
•
When recording composite signals, be sure to double-check
whether the signals are to be recorded with or without setup.
M II
This selects the analog component output level.
II
0: M level
B-CAM
1: ß-CAM level
<Note>
This setup menu is not displayed in the 625 mode.
CTL
This selects the signal to output from the VIDEO OUT2
connector.
TC
0: The CTL signal is output.
VIDEO
1: The TIME CODE signal is output.
SYNC
2: The VIDEO OUT signal is output.
RF-L
3: The SYNC signal is output.
RF-R
4: The PB L RF signal is output.
ENV-L
5: The PB R RF signal is output.
ENV-R
6: The PB L ENV signal is output.
7: The PB R ENV signal is output.
<Note>
An optional board (AJ-YA951) is required to output the SYNC
signal.
Description