Panasonic DVC PRO Studio AJ-D950P Service Manual page 19

Mode
Tool
1. Turns power off and remove the cassette compartment and set
mechanism plate (VFK153).
2. Place the flange tool (VFK1154) as shown in the figure and adjust
the post height.
3. Adjust the S1 and T1 post height by VFK1149 and adjust T3 and T4
by VFK1151.
Name Limit
S5 Post Note 1
S4 Post Note 1
T3 Post Lower Limit
T4 Post Lower Limit
Note:
Rotate CCW one turn from the lower limit.
5.6.5. Tension Arm Adjustment Procedures
EJECT (Power OFF)
VFK1153, VFK1154 (flange tool)
Post Driver
VFK1149
VFK1149
VFK1151(2.5mm Nut Box)
VFK1151 (2.5mm Nut Box)
19