Siemens Sinumerik 840D Operating Turning page 498

Hide thumbs Also See for Sinumerik 840D:

Simple measurement example

Acknowledge your entry by pressing the VSK 8

The following line is inserted into the program:

_MVAR=101 _SETVAL=50 _PRNUM=1 _KNUM=0

_FA=10 _TSA=10 _VMS=0 _NMSP=1

Now programme the End-of-Program with the follow-

N160 X100 Z200

Finally simulate the measurement of the work piece.

For this change back to the horizontal softkey-strip 1

by pressing the key "Extension" on the operator

Press the HSK 1.7 "Simulation" to start the simula-

tion of the program.

The control unit evaluates the simulation and opens

the simulation window with the side elevation of the

The 3D-view is an optional extra.

840D/828D SINUMERIK Operate

Sinumerik 828d