Siemens Sinumerik 840D Operating Turning page 416

Hide thumbs Also See for Sinumerik 840D:

Complex programming example

Insert "HOLES" into the "LAB" field to set a name for

the jump marks for the repeat positions.

Fill out the rest of the input mask like displayed be-

Confirm your inputs by pressing the VSK 8 "Accept".

The following line will be inserted into the program:

N110 HOLES: HOLES (0,0,30,0,30,8,1010, 0,,,1).

Program the following G code commands:

N140 G0 X200 Z150

Insert the tool "DRILL_D8.5" into the program (see

step 5) or program the following line by hand:

N150 T="Drill_D8.5" D1

Program the following G code commands:

N180 S1500 M3 F150

N190 G0 X0 Z100

Program the cycle for the drilling (CYCLE82).

For this, press HSK 1.2 "Drill.", to open the technol-

ogy "Drilling".

Press the VSK 2 "Drilling Reaming".

Press the VSK 3 "Drilling".

The input mask for the drilling cycle "CYCLE82"

Insert the values into the parameter mask like dis-

played below:

Accept your inputs by pressing the VSK 8 "Accept".

The following line will be inserted into the program:

N200 MCALL CYCLE82(100,0,1,,18,0.6,10,1,11).

840D/828D SINUMERIK Operate

Sinumerik 828d