Station Ringing Modes - Toshiba Strata DK40 Programming Manual

Station Ringing Modes

Important! 28 telephones maximum can be programmed to ring in any one mode (Day/
If delayed ringing occurs, the station that initially rings will continue to ring with subsequent
delayed ring stations. A wide variety of line ringing to stations can be programmed into the
system.
There are nine categories:
Ringing Mode
Day Immediate Ring assigned telephones on first ring from Exchange line.
Day Delay1 Delay1 is a 12-second delay of ringing signal to a standard, electronic, or digital telephone.
Day Delay2 Delay2 is a 24-second ring delay.
Day2 Immediate Same as Day Immediate except during Day2 mode.
Day2 Delay1 Same as Day Delay 1 except during Day 2 mode.
Day2 Delay2 Same as Day Delay 2 except during Day 2 mode.
Night Immediate Same as Day Immediate except during Night mode.
Night Delay1 Same as Day Delay 1 except during Night mode.
Night Delay2 Same as Day Delay 2 except during Night mode.
Day, Day2, Night refer to the 1LJKW 7UDQVIHU button's three modes.
Auto Attendant Delay Ring
To set Auto Attendant Delay Ring operation
Note
1. Assign Exchange lines to ring the Auto Attendant (AA) in Program 78.
Program 78-61: AA DAY
Program 78-62: AA DAY 2
Program 78-63: AA NIGHT
2. Assign stations that should ring (immediately for 12 seconds) before the AA answers to
the AA Exchange lines in Program 81 (84 – Day 2, 87 – Night). As an option, the
station can be equipped with the appropriate &2 /LQH or 3RROHG /LQH *US
buttons.
3. Assign stations that should ring (after a 12-second delay – for 12 seconds) before the
AA answers to the AA Exchange lines in Program 82 (85 – Day 2, 88 – Night). As an
option, the station can be equipped with the appropriate &2 /LQH or 3RROHG /LQH
*US buttons.
Strata DK40 Programming Manual Spring 1999
Day2/Night) per Exchange line.
If the Auto Attendant must answer calls on the first ring, do not assign Exchange
lines to ring telephones in Programs 81~89.
Stations assigned in Program 81 – ring immediate for 12 seconds and then stop
ringing unless they are also assigned to ring in Program 82. Assign [DN] for the
appropriate &2 /LQH or 3RROHG /LQH *US buttons to these ports using Program
39.
Comments
System & Station
3-183