Usage Phases And Their Tools/Documents; Target Group; Faults And Alarms - Siemens SINAMICS G150 Manual

Preface
Usage phases and their tools/documents (as an example)
Table V-1
Orientation
Planning/configuration
Deciding/ordering
Installation/assembly
Commissioning
Usage/operation
Maintenance/servicing

Target group

This documentation addresses machine manufacturers, commissioning engineers, and
service personnel who use SINAMICS.
Benefits
This documentation contains the comprehensive information about parameters, function
diagrams and faults and alarms required to commission and service the system.
This manual should be used in addition to the other manuals and tools provided for the product.
6
Usage phases and the available tools/documents
Usage phase
SINAMICS G Sales Documentation
SIZER Engineering Tool
Configuration Manuals, Motors
SINAMICS G Catalogs
• SINAMICS G150 Operating Instructions
• SINAMICS G130 Operating Instructions
• STARTER Commissioning Tool
• SINAMICS G150 Operating Instructions
• SINAMICS G130 Operating Instructions
• SINAMICS G150 Operating Instructions
• SINAMICS G130 Operating Instructions
• SINAMICS G150 Operating Instructions
• SINAMICS G130 Operating Instructions
Tools/documents
List Manual (LH2), 04/2014, A5E03263479A
SINAMICS G130/G150