Replace Floor Stand Covers - Cisco TelePresence MX800 Dual Replacement Manual

Cisco TelePresence MX800 Dual Replacement Guide
Contents Introduction Grilles and covers Grilles and covers Speakers and cameras Codec and monitors Appendix

Replace floor stand covers

The center cover is click-fastened. Lift up to
remove the cover.
The left and right covers are fastened with
magnets. Pull out gently to remove the covers.
2
1
Re-assembly:
2
The left and right covers snap to the magnets
when put back in place. The center cover
click-fastens when put back in place.
Spare part:
• CTS-MX800-D-FSK=
D15327.01 MX800 Dual Replacement Guide, MAY 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
8