Re-Assembly - Cisco TelePresence MX800 Dual Replacement Manual

Cisco TelePresence MX800 Dual
Contents
Replace PoE injector
(page 2 of 2)
Step 2: Remove PoE injector

Re-assembly:

In order to install the new PoE injector, follow all the steps in reverse order.
D15327.01 MX800 Dual Replacement Guide, MAY 2015.
Introduction Grilles and covers
Disconnect cables:
2a
1 × Power (top)
2 × RJ45 (bottom),
Ethernet and Touch 10
user interface.
Speakers and cameras
Remove screws and
2b
washers.
2 × M3x8 (pan),
Torx T10
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
29
Replacement Guide
Codec and monitors Codec and monitors Appendix
Remove PoE injector.
2c