Re-Assembly - Cisco TelePresence MX800 Dual Replacement Manual

Cisco TelePresence MX800 Dual Replacement Guide
Contents Introduction Grilles and covers Grilles and covers Speakers and cameras Codec and monitors Appendix
Replace center top profile, camera cover and center back cover
(page 3 of 3)
Step 3: Remove the center back cover
The center back cover is fastened with magnets.
Tilt the back cover out at the bottom, and slide it upward.

Re-assembly:

In order to replace the covers, follow the steps in
reversed order.
D15327.01 MX800 Dual Replacement Guide, MAY 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
12