Cisco TelePresence MX800 Dual Replacement Manual page 42

Cisco TelePresence MX800 Dual
Contents
Replace monitor (wall mounted)
Step 8: Unscrew monitor screws and
disconnect power cable
4 × M6x12 (countersunk),
Allen key, 4 mm
4 × M6x90 (countersunk),
Allen key, 4 mm
D15327.01 MX800 Dual Replacement Guide, MAY 2015.
Introduction Grilles and covers
(page 6 of 8)
Speakers and cameras
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
42
Replacement Guide
Codec and monitors Codec and monitors Appendix
Disconnect the power cable
between the two monitors.