Cisco TelePresence MX800 Dual Replacement Manual page 34

Cisco TelePresence MX800 Dual
Contents
Replace monitor (mounted on a stand)
Step 7: Remove monitor screws and disconnect power cable
4 × M6x12 (countersunk),
Allen key, 4 mm
4 × M6x90 (countersunk),
Allen key, 4 mm
D15327.01 MX800 Dual Replacement Guide, MAY 2015.
Introduction Grilles and covers
(page 5 of 7)
Speakers and cameras
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
34
Replacement Guide
Codec and monitors Codec and monitors Appendix
Disconnect the power
cable between the two
monitors.