Show Interfaces Configuration - Cisco 300 Series Cli Manual

Ethernet Configuration Commands
OL-32830-01 Command Line Interface Reference Guide
switchxxxxxx# errdisable recovery reset interface
—
Example 2 The following example reactivates all interfaces regardless their
state:
switchxxxxxx# errdisable recovery reset all
—
Example 3 The following example enables all interfaces in the port security
Err-Disable state
switchxxxxxx# errdisable recovery reset port-security

18.18 show interfaces configuration

To display the configuration for all configured interfaces or for a specific interface,
use the show interfaces configuration Privileged EXEC mode command.
Syntax
show interfaces configuration
Parameters
•
interface-id—(Optional) Specifies an interface ID. The interface ID can be
one of the following types: Ethernet port or port-channel.
•
detailed—(Optional) Displays information for non-present ports in addition
to present ports.
Default Configuration
Display all interfaces. If detailed is not used, only present ports are displayed.
Command Mode
Privileged EXEC mode
[interface-id | detailed
gi11
]
18
404