Green-Ethernet Short-Reach (Interface) - Cisco 300 Series Cli Manual

19
Green Ethernet
Parameters
This command has no arguments or keywords.
Default Configuration
Disabled.
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)# green-ethernet short-reach

19.4 green-ethernet short-reach (interface)

Use the green-ethernet short-reach Interface Configuration mode command to
enable green-ethernet short-reach mode on a port. Use the no form of this
command to disable it on a port.
Syntax
green-ethernet short-reach
no green-ethernet short-reach
Parameters
This command has no arguments or keywords.
Default Configuration
Disabled.
Command Mode
Interface (Ethernet) Configuration mode
User Guidelines
The VCT length check can be performed only on a copper port operating at a
speed of 1000 Mbps. If the media is not copper or the link speed is not 1000,
Mbps Short-Reach mode is not applied.
421 OL-32830-01 Command Line Interface Reference Guide