Show Interfaces Access-Lists - Cisco 300 Series Cli Manual

4
137
•
time-range-active—Shows only the Access Control Entries (ACEs) whose
time-range is currently active (including those that are not associated with
time-range).
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show access-lists
Standard IP access list 1
Extended IP access list ACL2
permit 234 172.30.19.1 0.0.0.255 any priority 20 time-range weekdays
permit 234 172.30.23.8 0.0.0.255 any priority 40 time-range weekdays
switchxxxxxx# show access-lists time-range-active
Extended IP access list ACL1
permit 234 172.30.40.1 0.0.0.0 any priority 20
permit 234 172.30.8.8
Extended IP access list ACL2
permit 234 172.30.19.1 0.0.0.255 any priority 20time-range weekdays
switchxxxxxx# show access-lists ACL1
Extended IP access list ACL1
permit 234 172.30.40.1 0.0.0.0 any priority 20
permit 234 172.30.8.8
4.16

show interfaces access-lists

Use the show interfaces access-lists Privileged EXEC mode command to display
access lists (ACLs) applied on interfaces.
Syntax
show interfaces access-lists
0.0.0.0 any priority 40
0.0.0.0 any priority 40
[interface-id]
OL-32830-01 Command Line Interface Reference Guide
ACL Commands