Honeywell HISD-2201WE-IR Operation Manual page 39

Users can set up DDNS domain name service at the same time. Fill the username and password which were applied in the DDNS server into
the DDNS setting item, implement port mapping from the router. The router determines and points to the IP camera that need to be visited
according to different ports, long-distance Internet user can visit the IP camera on the network via domain name directly.
Please refer to below picture for the network settings:
DDNS setting procedure：
1. Login DDNS server ( Such as http://www.no-ip.com), register accounts and password.
2. Click DDNS ( It is selectable when server provider is blank)
3. Select DDNS server provider, such as no-ip
4. Input the DDNS login username
5. Input the DDNS registered password
6. Input the domain name applied on the DDNS server, such as video.no-ip.net
7. Input the DDNS address, such as dynupdate.no-ip.com
8. Input the DDNS port, default is 80.( Suggested users keep it)
After all parameters setting completed, click "Save"and devices comes into effect.
Port mapping setting procedure
TP-LINK TL-WR340G illustration:
1. Ask network administrator for the IP address of the router (i.e. LAN gateway address), login user name and password, then log in
the router. The main interface is as follow:
2. Open "Forwarding", select "Virtual Servers" as below picture shows:
Honeywell
33