Makita 4101RH Instruction Manual page 10

1. Wing bolt
2. End of blade case
3. Red line
2
1. Base
2. Top guide
1
1. Switch trigger
2. Lock-off button
10
Loosen the wing bolt on the depth guide and move the base
003516
so that the end of the blade case is above the red line on the
1
depth guide. Then tighten the wing bolt to secure the base.
NOTE:
• If the end of the blade case is under the red line on the
2
depth guide, the outer flange may hit the workpiece
3
when you perform the bevel cut.
Sighting
003520
1
For straight cuts, align the A position on the front of the base
with your cutting line. For 45° bevel cuts, align the B position
with it.
A
B
Switch action
003523
CAUTION:
2
• Before plugging in the tool, always check to see that the
switch trigger actuates properly and returns to the "OFF"
position when released.
To prevent the switch trigger from being accidentally pulled, a
lock-off button is provided.
To start the tool, depress the lock-off button and pull the
switch trigger. Release the switch trigger to stop.