Wps - Draytek VigorAP 900 User Manual

Client's MAC
Address
Add
Delete
Edit
Cancel
Backup
Restore
After finishing this web page configuration, please click OK to save the settings.
3 . 9 . 4 W P S
3 . 9 . 4 W P S
Open Wireless LAN>>WPS to configure the corresponding settings.
Available settings are explained as follows:
Item
Enable WPS
WPS Configured
WPS SSID
WPS Auth Mode
WPS Encryp Type
Configure via Push
Manually enter the MAC address of wireless client.
Add a new MAC address into the list.
Delete the selected MAC address in the list.
Edit the selected MAC address in the list.
Give up the access control set up.
Click it to store the settings (MAC addresses on MAC Address
Filter table) on this page as a file.
Click it to restore the settings (MAC addresses on MAC
Address Filter table) from an existed file.
Description
Check this box to enable WPS setting.
Display related system information for WPS. If the wireless
security (encryption) function of VigorAP 900 is properly
configured, you can see 'Yes' message here.
Display current selected SSID.
Display current authentication mode of the VigorAP 900r.
Only WPA2/PSK and WPA/PSK support WPS.
Display encryption mode (None, WEP, TKIP, AES, etc.) of
VigorAP 900.
Click Start PBC to invoke Push-Button style WPS setup
127
VigorAP 900 User's Guide