Related Manuals for Makita GF600
Summary of Contents for Makita GF600
- Page 1 INSTRUCTION MANUAL Cordless Brad Nailer GF600 012803 IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model GF600 Nail length Nail Gauge 16Ga :15 mm - 65 mm Nail capacity 100 nails (2strip) Dimensions (L X W X H) 266 mm X 90 mm X 305 mm Net weight 2.2 kg Rated voltage D.C. -
Page 3: General Power Tool Safety Warnings
Designation of Machine: tools. Unmodified plugs and matching outlets will Cordless Brad Nailer reduce risk of electric shock. Model No./ Type: GF600 Avoid body contact with earthed or grounded are of series production and surfaces such as pipes, radiators, ranges and Conforms to the following European Directives: refrigerators. - Page 4 13. Remove any adjusting key or wrench before when used with another battery pack. turning the power tool on. A wrench or a key left 25. Use power tools only with specifically attached to a rotating part of the power tool may designated battery packs.
- Page 5 For Australia and New Zealand only Do not attempt to keep the contact element • Always wear safety glasses and face shield to depressed with tape or wire. Death or serious injury protect your eyes from dust or fastener injury. The may occur.
- Page 6 ENC009-1 when changing one driving location to another involves the use of scaffoldings, stairs, ladders, IMPORTANT SAFETY or ladder alike constructions, e.g. roof laths; INSTRUCTIONS closing boxes or crates; fitting transportation safety systems e.g. on FOR BATTERY CARTRIDGE vehicles and wagons. Check walls, ceilings, floors, roofing and the like •...
-
Page 7: Functional Description
Overview of the nailer 012805 To install the battery cartridge, hold it so that the battery cartridge front shape fits to that of the battery installment opening and slip it into place. Insert it all the way until it locks in place with a little click. 1. -
Page 8: Adjusting The Nailing Depth
Fuel cell 1. Jet nozzle Attaching the metering valve to the fuel cell 1. Metering valve 2. Cap 012809 Insert the fuel cell directing the jet nozzle of the metering valve toward the adaptor. 012807 Detach the cap (in case the metering valve is provided with the cap). -
Page 9: Indication Lamp
Indication lamp Color of the indication lamp means the followings. Blinking green: Normal status Blinking red: Need to recharge the battery cartridge Lighting-up-red: Recharge the battery cartridge. Nailing cannot be performed due to no remaining battery capacity. Blinking orange after blinking green and red alternately: Fault detection is running. -
Page 10: Operation
1. Nose adapter 012817 012894 To drive a nail, place the contact element against Short nail adapter the workpiece. The fan motor is activated, fuel gas is injected into 1. Short nail combustion chamber and mixed with air by the fan. adapter 1. -
Page 11: Maintenance
Open the latch and release the door, then remove the To maintain product SAFETY and RELIABILITY, repairs, jammed nail. any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always MAINTENANCE using Makita replacement parts. Thoroughly cleaning CAUTION: If dry fires occur frequently, which means the tool is Always remove the fuel cell, the battery cartridge... - Page 12 Makita Corporation Anjo, Aichi, Japan www.makita.com 885078B228...