17. Jet nozzle 26. Filter Magazine 18. Adjuster SPECIFICATIONS Model GF600 Nail length Nail Gauge 16Ga: 15 mm - 65 mm Nail capacity 100 nails (2 strip) Dimensions (L x H x W) 266 mm x 90 mm x 305 mm Net weight 2.2 kg...
Power source • Do not operate when under the influence of alcohol, • Use the tool only with the Makita genuine fuel cell. drugs or the like. • Do not touch liquid gas sprayed out of the fuel cell.
3. Charge the battery cartridge with room related wear. Wipe off all dust from the parts. temperature at 10°C - 40°C (50°F - 104°F). Let a hot • Ask Makita authorized service center for periodical battery cartridge cool down before charging it. inspection of the tool.
(Fig. 23) running again, it is malfunction condition. Ask your local 2. Hold the contact element pressing firmly and pull the Makita service center to repair it. trigger. Fuel gas is combusted and the nail is driven. Installing the hook (Fig. 14) 3.
CAUTION: Jammed nailer • These accessories or attachments are recommended for use with your Makita tool specified in this manual. WARNING: The use of any other accessories or attachments might • Always be sure to remove the fuel cell and the battery present a risk of injury to persons.
Page 11
The technical documentation is kept by our authorised representative in Europe who is: Makita International Europe Ltd. Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 8JD, England 26. 4. 2011 Tomoyasu Kato Director Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi, 446-8502, JAPAN...
Aandrukkerhendel 17. Spuitmond 26. Luchtfilter Magazijn 18. Stelknop TECHNISCHE GEGEVENS Model GF600 Nagellengte Nagelmaat 16Ga: 15 mm - 65 mm Nagelcapaciteit 100 nagels (2 strip) Afmetingen (l x h x b) 266 mm x 90 mm x 305 mm Nettogewicht...
Page 13
AS/NZS 1336 (zie afb. 1). • Gebruik het gereedschap uitsluitend met een origineel • Draag gehoorbescherming om uw oren te beschermen Makita-brandstofpatroon. tegen het uitlaatgeluid en draag hoofdbescherming. • Raak het vloeibare gas dat uit de brandstofpatroon Draag tevens lichte maar geen losse kleding.
• Ga er altijd vanuit dat in het gereedschap onderdelen af. bevestigingsmiddelen zitten. • Vraag een erkend Makita-servicecentrum regelmatig • Richt het gereedschap niet op uzelf of anderen, het gereedschap te inspecteren. ongeacht of er bevestigingsmiddelen in zitten of niet.
3. Als de gebruikstijd aanzienlijk korter is geworden, beschadigd raken, of kan persoonlijk letsel worden stopt u onmiddellijk met het gebruik. Anders kan veroorzaakt (zie afb. 3). dit leiden tot kans op oververhitting, mogelijke Om de accu aan te brengen, houdt u de accu zodanig brandwonden en zelfs een explosie.
Page 16
Als de ontstaan. storingsdetectie opnieuw in werking treedt, is een storing opgetreden. Vraag uw plaatselijke Makita-servicecentrum LET OP: om hem te repareren. • Controleer voor gebruik dat alle beveiligingssystemen goed werken (zie afb.
• Deze accessoires of hulpstukken worden aanbevolen EN792 en EN60745 voor gebruik met het Makita-gereedschap dat in deze De technische documentatie wordt bewaard door onze gebruiksaanwijzing wordt beschreven. Het gebruik van erkende vertegenwoordiger in Europa, te weten: andere accessoires of hulpstukken kan gevaar voor Makita International Europe Ltd.
Page 18
Makita Corporation Anjo, Aichi, Japan www.makita.com 885078-999...