Related Manuals for Makita GN420CSE
Summary of Contents for Makita GN420CSE
- Page 1 INSTRUCTION MANUAL Cordless Concrete Nailer GN420C 013225 IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model GN420C Nail capacity 20 nails (2strips) 40 nails (4strips) Dimensions (L X W X H) 315 mm X 108 mm X 390 mm 430 mm X 108 mm X 390 mm Net weight 3.6 kg 3.8 kg Nail length X Shank diameter Nail L :15 mm - 40 mm... -
Page 3: General Power Tool Safety Warnings
Electrical safety Makita Corporation responsible Power tool plugs must match the outlet. Never manufacturer declare that the following Makita modify the plug in any way. Do not use any machine(s): adapter plugs with earthed (grounded) power Designation of Machine: tools. Unmodified plugs and matching outlets will Cordless Concrete Nailer reduce risk of electric shock. - Page 4 13. Remove any adjusting key or wrench before 25. Use power tools only with specifically turning the power tool on. A wrench or a key designated battery packs. Use of any other left attached to a rotating part of the power tool battery packs may create a risk of injury and fire.
- Page 5 Safety glasses of the tool. Power source Face shield Use the tool only with the Makita genuine fuel cell. • Do not touch liquid gas sprayed out of the fuel cell. • Contact with it may cause injury.
- Page 6 Wipe off all dust Do not use a damaged battery. from the parts. SAVE THESE INSTRUCTIONS. Ask Makita authorized service center for periodical • inspection of the tool. Tips for maintaining maximum battery life To maintain product SAFETY and RELIABILITY, •...
-
Page 7: Functional Description
Overview of the nailer 1. Battery cartridge 013181 To install the battery cartridge, hold it so that the battery cartridge front shape fits to that of the battery installment opening and slip it into place. Insert it all the way until it locks in place with a little click. 1. -
Page 8: Adjusting The Nailing Depth
Fuel cell 1. Jet nozzle Attaching the metering valve to the fuel cell 1. Metering valve 2. Cap 013153 Insert the fuel cell directing the jet nozzle of the metering valve toward the adaptor. 009445 Detach the cap (in case the metering valve is provided with the cap). -
Page 9: Indication Lamp
Ask your local Pull the pusher lever with pressing the pusher button all Makita service center to repair it. the way to the rear of the magazine. Then release the pusher button, and return the pusher lever to the end of Hook the strip gently. -
Page 10: Operation
Failure to do so may cause concrete fragments to OPERATION fly off or nails to strike back, causing serious injuries. When driving nails, hold the tool so that it stands WARNING: • upright to the driving surface. Do not touch around the exhaust vent. The •... -
Page 11: Maintenance
Return the under driver guide and tighten the bolts after any other maintenance or adjustment should be the jammed nails are removed. performed by Makita Authorized Service Centers, Return the magazine and tighten the bolt. always using Makita replacement parts. -
Page 12: Optional Accessories
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Nails • Magazine • Safety goggles •... - Page 16 Makita Corporation Anjo, Aichi, Japan www.makita.com 885157-222...