Chapter 11 Removing The Bwx 120 Pcmcia Modem - Cisco BWX 120 User Manual

11
C H A P T E R
Removing the BWX 120 PCMCIA Modem
Before you store your BWX 120 PCMCIA Modem in a computer case, you should remove the modem
from the PC. Also, turn the antenna to its original down position. Leaving the modem in the PC or the
antenna in the upright position while storing the PC in a computer case may damage the modem or the
antenna.
To properly remove the BWX 120 PCMCIA Modem from your computer, you must first stop the driver
software. If you do not stop the driver software first, the following window may appear:
To safely remove the BWX 120 PCMCIA Modem, click on the icon indicated in the following
illustration. Depending on your computer's setup, this icon is probably located in the lower-right corner
of your computer.
BWX 120 PCMCIA Modem User Guide
11-1
OL-16321-03