Makita HS300D Instruction Manual
Cordless circular saw
Hide thumbs
Also See for HS300D:
- Instruction manual (65 pages) ,
- Instruction manual (36 pages) ,
- Instruction manual (60 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Makita HS300D
Summary of Contents for Makita HS300D
- Page 1 INSTRUCTION MANUAL Cordless Circular Saw HS300D 011325 IMPORTANT: Read Before Using.
-
Page 2: Specifications
EC Declaration of Conformity Sound pressure level (L ) : 70 dB (A) or less Makita declares that the following Machine(s): Uncertainty (K) : 3 dB (A) Designation of Machine: The noise level under working may exceed 80 dB (A). - Page 3 The technical file in accordance with 2006/42/EC is moving parts. Damaged or entangled cords available from: increase the risk of electric shock. Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use 31.12.2013 of a cord suitable for outdoor use reduces the risk of electric shock.
- Page 4 cannot be controlled with the switch is dangerous 30. Keep handles dry, clean and free from oil and and must be repaired. grease. GEB077-4 19. Disconnect the plug from the power source and/or the battery pack from the power tool CORDLESS CIRCULAR SAW before making any adjustments, changing SAFETY WARNINGS...
- Page 5 Kickback causes and related warnings − kickback is a sudden reaction to a pinched, bound or misaligned saw blade, causing an uncontrolled saw to lift up and out of the workpiece toward the operator; − when the blade is pinched or bound tightly by the kerf closing down, the blade stalls and the motor reaction drives the unit rapidly back toward the operator;...
- Page 6 Additional safety warnings 23. Use extra caution when cutting damp wood, pressure treated lumber, or wood containing knots. Maintain smooth advancement of tool without decrease in blade speed to avoid overheating the blade tips. 24. Do not attempt to remove cut material when blade is moving.
- Page 7 If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. It may result in loss of your eyesight. Do not short the battery cartridge: Do not touch the terminals with any conductive material. Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc.
-
Page 8: Functional Description
Overloaded: • FUNCTIONAL DESCRIPTION The tool is operated in a manner that causes it to draw an abnormally high current. In this situation, release the switch trigger on CAUTION: the tool and stop the application that caused Always be sure that the tool is switched off and the •... - Page 9 Be sure the blade is installed with teeth pointing • up at the front of the tool. Use only the Makita wrench to install or remove • the blade. To remove the blade, press the shaft lock fully so that...
-
Page 10: Operation
When you wish to perform clean cutting operation, and lower blade guards of accumulated sawdust. Such connect a Makita vacuum cleaner to your tool. Install efforts do not, however, replace the need to check lower the dust nozzle (accessory) on the tool using the screw. -
Page 11: Maintenance
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Saw blades • Rip fence (Guide rule) • Hex wrench 4 •... - Page 12 Makita Jan-Baptist Vinkstraat 2, 3070, Belgium Makita Corporation Anjo, Aichi, Japan www.makita.com 884978C229...