HIKVISION DS-2CD6362F-I User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Security Camera
  5. DS-2CD6362F-I
  6. User manual

HIKVISION DS-2CD6362F-I User Manual

Network fisheye camera
Hide thumbs Also See for DS-2CD6362F-I:
Table of Contents

Advertisement

Quick Links

Network Fisheye Camera

User Manual

UD.6L0201D1624A01

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION DS-2CD6362F-I

Summary of Contents for HIKVISION DS-2CD6362F-I

  • Page 1: User Manual

    Network Fisheye Camera User Manual UD.6L0201D1624A01...
  • Page 2 Thank you for purchasing our product. If there are any questions or requests, please do not hesitate to contact the dealer. This manual applies to DS-2CD6362F-I (V) (S), DS-2CD6332FWD-I (V) (S network fisheye camera. This manual may contain several technical incorrect places or printing errors, and the content is subject to change without notice.

  • Page 3: Regulatory Information

    User Manual of Network Fisheye Camera Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

  • Page 4: Safety Instruction

    User Manual of Network Fisheye Camera Safety Instruction These instructions are intended to ensure that the user can use the product correctly to avoid danger or property loss. The precaution measure is divided into ‘Warnings’ and ‘Cautions’: Warnings: Serious injury or death may be caused if any of these warnings are neglected.
  • Page 5 User Manual of Network Fisheye Camera Cautions:  Make sure the power supply voltage is correct before using the camera.  Do not drop the camera or subject it to physical shock.  Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with a bit of ethanol and wipe it gently.

  • Page 6: Table Of Contents

    User Manual of Network Fisheye Camera Table of Contents Chapter 1 System Requirement ................8 Chapter 2 Network Connection ................9 Setting the Network Camera over the LAN............9 2.1.1 Wiring over the LAN ......................9 2.1.2 Detecting and Changing the IP Address ................. 10 Setting the Network Camera over the WAN ............
  • Page 7 User Manual of Network Fisheye Camera 5.4.2 Configuring Audio Settings .................... 44 5.4.3 Configuring ROI Encoding ..................... 45 Configuring Image Parameters ................47 5.5.1 Configuring Display Settings ..................47 5.5.2 Configuring OSD Settings ....................50 5.5.3 Configuring Privacy Mask ....................51 Configuring and Handling Alarms ..............
  • Page 8 User Manual of Network Fisheye Camera Appendix ........................88 Appendix 1 SADP Software Introduction ............... 88 Appendix 2 Port Mapping ....................91...

  • Page 9: Chapter 1 System Requirement

    User Manual of Network Fisheye Camera Chapter 1 System Requirement Operating System: Microsoft Windows XP SP1 and above version / Vista / Win7 / Server 2003 / Server 2008 32bits CPU: Intel Pentium IV 3.0 GHz or higher RAM: 1G or higher Display: 1024×...

  • Page 10: Chapter 2 Network Connection

    User Manual of Network Fisheye Camera Chapter 2 Network Connection Before you start:  If you want to set the network camera via a LAN (Local Area Network), please refer to Section 2.1 Setting the Network Camera over the LAN. ...

  • Page 11: Detecting And Changing The Ip Address

    User Manual of Network Fisheye Camera Figure 2-2 Connecting via a Switch or a Router 2.1.2 Detecting and Changing the IP Address You need the IP address to visit the network camera. Steps: 1. To get the IP address, you can choose either of the following methods: ...

  • Page 12: Setting The Network Camera Over The Wan

    User Manual of Network Fisheye Camera Figure 2-3 SADP Interface 2.2 Setting the Network Camera over the WAN Purpose: This section explains how to connect the network camera to the WAN with a static IP or a dynamic IP. 2.2.1 Static IP Connection Before you start: Please apply a static IP from an ISP (Internet Service Provider).

  • Page 13: Dynamic Ip Connection

    User Manual of Network Fisheye Camera 2. Assign a LAN IP address, the subnet mask and the gateway. Refer to Section 2.1.2 Detecting and Changing the IP Address for detailed IP address configuration of the camera. 3. Save the static IP in the router. 4.
  • Page 14 User Manual of Network Fisheye Camera 1. Connect the network camera to the router. 2. In the camera, assign a LAN IP address, the subnet mask and the gateway. Refer to Section 2.1.2 Detecting and Changing the IP Address for detailed LAN configuration.
  • Page 15 User Manual of Network Fisheye Camera Figure 2-7 Normal Domain Name Resolution Steps: 1. Apply a domain name from a domain name provider. 2. Configure the DDNS settings in the DDNS Settings interface of the network camera. Refer to Section 5.3.4 Configuring DDNS Settings for detailed configuration.

  • Page 16: Chapter 3 Access To The Network Camera

    User Manual of Network Fisheye Camera Chapter 3 Access to the Network Camera 3.1 Accessing by Web Browsers Steps: 1. Open the web browser. 2. Input the IP address of the network camera in the address bar, e.g., 192.0.0.64 and press the Enter key to enter the login interface.
  • Page 17 User Manual of Network Fisheye Camera Figure 3-2 Download and Install Plug-in Figure 3-3 Install Plug-in (1) Figure 3-4 Install Plug-in (2) Note: You may have to close the web browser to install the plug-in. Please reopen the web browser and log in again after installing the plug-in.

  • Page 18: Accessing By Client Software

    User Manual of Network Fisheye Camera 3.2 Accessing by Client Software The product CD contains the iVMS-4200 client software. You can view the live video and manage the camera with the software. Follow the installation prompts to install the software. The control panel and live view interface of iVMS-4200 client software are shown as bellow.

  • Page 19: Chapter 4 Live View

    User Manual of Network Fisheye Camera Chapter 4 Live View 4.1 Live View Page Purpose: The live view page allows you to view the real-time video, capture images, realize PTZ control, set/call presets and configure video parameters. Log in the network camera to enter the live view page, or you can click Live View on the menu bar of the main page to enter the live view page.

  • Page 20: Starting Live View

    User Manual of Network Fisheye Camera approximates the vision of a fish’s convex eye. The lens produces curvilinear images of a large area, while distorting the perspective and angles of objects in the image.  Panorama View: In the Panorama View mode, the distorted fisheye image is transformed to normal perspective image by some calibration methods.

  • Page 21: Recording And Capturing Pictures Manually

    User Manual of Network Fisheye Camera The window size is 4:3. The window size is 16:9. Self-adaptive window size. Manually capture the picture. Manually start/stop recording. Audio on and adjust volume /Mute. Turn on/off microphone. 4.3 Recording and Capturing Pictures Manually In the live view interface, click on the toolbar to capture the live pictures or click...

  • Page 22: Setting / Calling A Preset

    User Manual of Network Fisheye Camera Figure 4-3 PTZ Control Panel Notes: There are 8 direction arrows ( , , , , , , , ) in the live view window when you click and drag the mouse in the relative positions. Table 4-2 Descriptions of PTZ Control Panel Icon Description...

  • Page 23: Setting / Calling A Patrol

    User Manual of Network Fisheye Camera 3. Click to finish the setting of the current preset. 4. You can click to delete the preset. Note: You can configure up to 128 presets.  Calling a Preset: This feature enables the camera to point to a specified preset scene manually when an event takes place.
  • Page 24 User Manual of Network Fisheye Camera Figure 4-6 Add Patrol Path 6. Click to save a patrol. 7. Click to start the patrol, and click to stop it. 8. (Optional) Click to delete a patrol.

  • Page 25: Chapter 5 Network Camera Configuration

    User Manual of Network Fisheye Camera Chapter 5 Network Camera Configuration 5.1 Configuring Local Parameters Note: The local configuration refers to the parameters of the live view, record files and captured pictures. The record files and captured pictures are the ones you record and captured using the web browser and thus the saving paths of them are on the PC running the browser.
  • Page 26 User Manual of Network Fisheye Camera streaming under some network environments. MULTICAST: It’s recommended to select MCAST type when using the Multicast function. For detailed information about Multicast, refer to Section 5.3.1 TCP/IP Settings.  Live View Performance: Set the live view performance to Shortest Delay, Real Time, Balanced or Best Fluency.

  • Page 27: Configuring Time Settings

    User Manual of Network Fisheye Camera 5.2 Configuring Time Settings Purpose: You can follow the instructions in this section to configure the time synchronization and DST settings. Steps: 1. Enter the Time Settings interface: Configuration > Basic Configuration > System > Time Settings Or Configuration >...
  • Page 28 User Manual of Network Fisheye Camera Figure 5-3 Time Sync by NTP Server Note: If the camera is connected to a public network, you should use a NTP server that has a time synchronization function, such as the server at the National Time Center (IP Address: 210.72.145.44).

  • Page 29: Configuring Network Settings

    User Manual of Network Fisheye Camera 5.3 Configuring Network Settings 5.3.1 Configuring TCP/IP Settings Purpose: TCP/IP settings must be properly configured before you operate the camera over network. The camera supports both the IPv4 and IPv6. Both versions may be configured simultaneously without conflicting to each other, and at least one IP version should be configured.

  • Page 30: Configuring Port Settings

    User Manual of Network Fisheye Camera Notes:  The valid value range of MTU is 500 ~ 1500.  The Multicast sends a stream to the multicast group address and allows multiple clients to acquire the stream at the same time by requesting a copy from the multicast group address.

  • Page 31: Configuring Pppoe Settings

    User Manual of Network Fisheye Camera No. which is not occupied. Server Port: The default server port number is 8000, and it can be changed to any port No. ranges from 2000 to 65535. 3. Click Save to save the settings. Note: A reboot is required for the settings to take effect.
  • Page 32 User Manual of Network Fisheye Camera the camera. Steps: 1. Enter the DDNS Settings interface: Configuration > Advanced Configuration > Network > DDNS Figure 5-9 DDNS Settings 2. Check the Enable DDNS checkbox to enable this feature. 3. Select DDNS Type. Four DDNS types are selectable: HiDDNS, IPServer , DynDNS and NO-IP.
  • Page 33 User Manual of Network Fisheye Camera Figure 5-10 DynDNS Settings  IP Server: Steps: (1) Enter the Server Address of the IP Server. (2) Click Save to save the settings. Note: For the IP Server, you have to apply a static IP, subnet mask, and gateway and preferred DNS from the ISP.
  • Page 34 User Manual of Network Fisheye Camera Figure 5-12 NO-IP DNS Settings (2) Enter the Server Address as www.noip.com (3) Enter the Domain name you registered. (4) Enter the Port number, if needed. (5) Enter the User Name and Password. (6) Click Save and then you can view the camera with the domain name. ...

  • Page 35: Configuring Snmp Settings

    User Manual of Network Fisheye Camera 5.3.5 Configuring SNMP Settings Purpose: You can set the SNMP function to get camera status, parameters and alarm related information and manage the camera remotely when it is connected to the network. Before you start: Before setting the SNMP, please download the SNMP software and manage to receive the camera information via SNMP port.

  • Page 36: Configuring 802.1X Settings

    User Manual of Network Fisheye Camera Figure 5-14 SNMP Settings 2. Check the corresponding version checkbox ( ) to enable the feature. 3. Configure the SNMP settings. Note: The settings of the SNMP software should be the same as the settings you configure here.

  • Page 37: Configuring Qos Settings

    User Manual of Network Fisheye Camera connecting the camera to the network protected by the IEEE 802.1X. Before you start: The authentication server must be configured. Please apply and register a user name and password for 802.1X in the server. Steps: 1.

  • Page 38: Configuring Upnp™ Settings

    User Manual of Network Fisheye Camera Configuration >Advanced Configuration > Network > QoS Figure 5-16 QoS Settings 2. Configure the QoS settings, including video / audio DSCP, event / alarm DSCP and Management DSCP. The valid value range of the DSCP is 0-63. The bigger the DSCP value is, the higher the priority is.

  • Page 39: Email Sending Triggered By Alarm

    User Manual of Network Fisheye Camera Figure 5-17 Configure UPnP Settings 5.3.9 Email Sending Triggered by Alarm Purpose: The system can be configured to send an Email notification to all designated receivers if an alarm event is detected, e.g., motion detection event, video loss, video tampering, etc.
  • Page 40 User Manual of Network Fisheye Camera Figure 5-18 Email Settings 3. Configure the following settings: Sender: The name of the email sender. Sender’s Address: The email address of the sender. SMTP Server: The SMTP Server IP address or host name (e.g., smtp.263xmail.com).

  • Page 41: Configuring Nat (Network Address Translation) Settings

    User Manual of Network Fisheye Camera this checkbox to use authentication to log in to this server and enter the login user Name and password. Choose Receiver: Select the receiver to which the email is sent. Up to 2 receivers can be configured.

  • Page 42: Configuring Ftp Settings

    User Manual of Network Fisheye Camera 5.3.11 Configuring FTP Settings Purpose: You can configure the FTP server related information to enable the uploading of the captured pictures to the FTP server. The captured pictures can be triggered by events or a timing snapshot task. Steps: 1.

  • Page 43: Configuring Video And Audio Settings

    User Manual of Network Fisheye Camera Figure 5-21 FTP Settings Note: The anonymous access function must be supported by the FTP server. 3. Click Save to save the settings. Note: If you want to upload the captured pictures to FTP server, you have to enable the continuous snapshot or event-triggered snapshot on Snapshot page.
  • Page 44 User Manual of Network Fisheye Camera Figure 5-22 Configure Video Settings 2. Select the Stream Type of the camera to main stream (normal), sub-stream or third stream. The main stream is usually for recording and live viewing with good bandwidth, and the sub-stream and third stream can be used for live viewing when the bandwidth is limited.

  • Page 45: Configuring Audio Settings

    User Manual of Network Fisheye Camera Set the frame rate to 1/16~25 fps. The frame rate is to describe the frequency at which the video stream is updated and it is measured by frames per second (fps). A higher frame rate is advantageous when there is movement in the video stream, as it maintains image quality throughout.

  • Page 46: Configuring Roi Encoding

    User Manual of Network Fisheye Camera Figure 5-23 Audio Settings 2. Configure the following settings. Audio Encoding: G.711 ulaw, G.711alaw, G.726, and MP2L2 are selectable. And 32kbps, 64kbps, and 128kbps are supported if MP2L2 is selected. Audio Input: MicIn and Linein are selectable for the connected microphone and pickup respectively.
  • Page 47 User Manual of Network Fisheye Camera Figure 5-24 Region of Interest Settings 2. Draw the region of interest on the image. There are four regions can be drawn. 3. Choose the stream type to set the ROI encoding. 4. Choose the ROI type. There are two options for ROI encoding, the fixed region encoding and the dynamic tracking.

  • Page 48: Configuring Image Parameters

    User Manual of Network Fisheye Camera 5.5 Configuring Image Parameters 5.5.1 Configuring Display Settings Purpose: You can set the image quality of the camera, including brightness, contrast, saturation, hue, sharpness, etc. Note: The display parameters vary according to the different camera model. Please refer to the actual interface for details.
  • Page 49 User Manual of Network Fisheye Camera Brightness describes bright of the image, which ranges from 1~100, and the default value is 50. Contrast describes the contrast of the image, which ranges from 1~100, and the default value is 50. Hue adjusts color of the image. Saturation describes the colorfulness of the image color, which ranges from 1~100, and the default value is 50.
  • Page 50 User Manual of Network Fisheye Camera Schedule: The camera switches between the day mode and the night mode according to the configured time period. Triggered by Alarm Input: The camera switches to the day mode or the night mode after the alarm is triggered. Smart IR: Smart IR function gives user an option to adjust the power of the IR LED, thus avoiding image over-exposure.

  • Page 51: Configuring Osd Settings

    User Manual of Network Fisheye Camera environment. Video Standard: 50 Hz and 60 Hz are selectable. Choose according to the different video standards; normally 50 Hz for PAL standard and 60 Hz for NTSC standard. 5.5.2 Configuring OSD Settings Purpose: You can customize the camera name and time on the screen.

  • Page 52: Configuring Privacy Mask

    User Manual of Network Fisheye Camera Figure 5-29 Adjust OSD Location 6. Click Save to activate above settings. 5.5.3 Configuring Privacy Mask Purpose: Privacy mask enables you to cover certain areas on the live video to prevent certain spots in the surveillance area from being live viewed and recorded. Steps: 1.

  • Page 53: Configuring And Handling Alarms

    User Manual of Network Fisheye Camera 4. Click and drag the mouse in the live video window to draw the mask area. Note: You are allowed to draw up to 4 areas on the same image. 5. Click Stop Drawing to finish drawing or click Clear All to clear all of the areas you set without saving them.
  • Page 54 User Manual of Network Fisheye Camera Figure 5-31 Enable Motion Detection (3)Click . Click and drag the mouse on the live video image to draw a motion detection area. Note: You can draw up to 8 motion detection areas on the same image. (4)Click to finish drawing.
  • Page 55 User Manual of Network Fisheye Camera editing interface of the arming schedule. (2)Choose the day you want to set the arming schedule. (3)Click to set the time period for the arming schedule. (4)After you set the arming schedule, you can copy the schedule to other days (Optional).

  • Page 56: Configuring Video Tampering Alarm

    User Manual of Network Fisheye Camera Steps: (1) Check the checkbox to select the linkage method. Notify surveillance center, send email, upload to FTP, trigger channel and trigger alarm output are selectable (Optional).  Notify Surveillance Center Send an exception or alarm signal to remote management software when an event occurs.

  • Page 57: Configuring Alarm Input

    User Manual of Network Fisheye Camera alarm response action. Steps: 1. Enter the Tamper-proof Settings interface: Configuration > Advanced Configuration > Basic Event > Video Tampering Figure 5-35 Tamper-proof Alarm 2. Check Enable Tamper-proof checkbox to enable the tamper-proof detection. 3.

  • Page 58: Configuring Alarm Output

    User Manual of Network Fisheye Camera Configuration > Advanced Configuration> Basic Event > Alarm Input: 2. Choose the alarm input No. and the Alarm Type. The alarm type can be NO (Normally Open) and NC (Normally Closed). Edit the name to set a name for the alarm input (optional).

  • Page 59: Handling Exception

    User Manual of Network Fisheye Camera also set a name for the alarm output (optional). 3. The Delay time can be set to 5sec, 10sec, 30sec, 1min, 2min, 5min, 10min or Manual. The delay time refers to the time duration that the alarm output remains in effect after alarm occurs.

  • Page 60: Configuring Line Crossing Detection

    User Manual of Network Fisheye Camera Task 3: Set the Alarm Actions Taken for Motion Detection in Section 5.6.1. Figure 5-38 Exception Settings 3. Click Save to save the settings. 5.6.6 Configuring Line Crossing Detection Purpose: Line crossing detection function detects people, vehicle or other objects which cross a pre-defined virtual line, and some certain actions can be taken when the alarm is triggered.

  • Page 61: Configuring Intrusion Detection

    User Manual of Network Fisheye Camera 2. Check the checkbox of Enable Line Crossing Detection to enable the function. 3. Select the line from the drop-down list for detection settings. 4. Click the Draw Area button, and a virtual line is displayed on the live video. 5.
  • Page 62 User Manual of Network Fisheye Camera Intrusion detection function detects people, vehicle or other objects which enter and loiter in a pre-defined virtual region, and some certain actions can be taken when the alarm is triggered. Note: Intrusion detection function varies according to different camera models. Steps: 1.

  • Page 63: Configuring Heat Map

    User Manual of Network Fisheye Camera object entering the region. Sensitivity: Range [1-100]. The value of the sensitivity defines the size of the object which can trigger the alarm. When the sensitivity is high, a very small object can trigger the alarm. Percentage: Range [1-100].
  • Page 64 User Manual of Network Fisheye Camera Figure 5-41 Heat Map Configuration 2. Check the checkbox of Heat Map to enable the function. 3. Select the region from the drop-down list for detection settings. 4. Click the icon , and then specify four vertexes to define the detection region for heat value statistics.
  • Page 65 User Manual of Network Fisheye Camera dynamic environment, e.g., a swaying curtain. The camera may treat the swaying curtain as a target. Setting the level properly will avoid the misinformation. The default level is 50. Minimum Target Size [0~100]: It refers to the size of the camera identify a target.

  • Page 66: Chapter 6 Storage Settings

    User Manual of Network Fisheye Camera Chapter 6 Storage Settings Before you start: To configure record settings, please make sure that you have the network storage device within the network or the SD card inserted in your camera. 6.1 Configuring NAS Settings Before you start: The network disk should be available within the network and properly configured to store the recorded files, log files, etc.
  • Page 67 User Manual of Network Fisheye Camera Storage Management), in which you can view the capacity, free space, status, type and property of the disk. Figure 6-2 Storage Management Interface (2) If the status of the disk is Uninitialized, check the corresponding checkbox to select the disk and click Format to start initializing the disk.

  • Page 68: Configuring Recording Schedule

    User Manual of Network Fisheye Camera  To initialize and use the SD card after insert it to the camera, please refer to the steps of NAS disk initialization. 6.2 Configuring Recording Schedule Purpose: There are two kinds of recording for the cameras: manual recording and scheduled recording.
  • Page 69 User Manual of Network Fisheye Camera Figure 6-6 Record Parameters  Pre-record: The time you set to start recording before the scheduled time or the event. For example, if an alarm triggers recording at 10:00, and the pre-record time is set as 5 seconds, the camera starts to record at 9:59:55. The Pre-record time can be configured as No Pre-record, 5 s, 10 s, 15 s, 20 s, 25 s, 30 s or not limited.
  • Page 70 User Manual of Network Fisheye Camera (1) Set all-day record or segment record:  If you want to configure the all-day recording, please check the All Day checkbox.  If you want to record in different time sections, check the Customize checkbox.
  • Page 71 User Manual of Network Fisheye Camera and alarm are triggered at the same time. Besides configuring the recording schedule, you have to configure the settings on the Motion Detection and Alarm Input Settings interfaces. Please refer to Section 5.6.1 and Section 5.6.3 for detailed information. ...

  • Page 72: Configuring Snapshot Settings

    User Manual of Network Fisheye Camera 6.3 Configuring Snapshot Settings Purpose: You can configure the scheduled snapshot and event-triggered snapshot. The captured picture can be stored in the SD card (if supported) or the netHDD (For detailed information about netHDD, please refer to Section 6.1 Configuring NAS Settings). You can also upload the captured pictures to a FTP server.
  • Page 73 User Manual of Network Fisheye Camera 2) Check Upload Picture checkbox in Motion Detection Settings or Alarm Input interface. Please refer to Task 3: Set the Alarm Actions Taken for Motion Detection in Section 5.6.1. 3) Check the Enable Event-triggered Snapshot checkbox. Figure 6-9 Snapshot Settings...

  • Page 74: Chapter 7 Playback

    User Manual of Network Fisheye Camera Chapter 7 Playback Purpose: This section explains how to view the remotely recorded video files stored in the network disks or SD cards. Steps: 1. Click Playback on the menu bar to enter playback interface. Figure 7-1 Playback Interface 2.
  • Page 75 User Manual of Network Fisheye Camera The toolbar on the bottom of Playback interface can be used to control playing process. Figure 7-3 Playback Toolbar Table 7-1 Description of the buttons Button Operation Button Operation Play Capture a picture Start/Stop clipping video Pause files Audio on and adjust...

  • Page 76: Chapter 8 Log Searching

    User Manual of Network Fisheye Camera Chapter 8 Log Searching Purpose: The operation, alarm, exception and information of the camera can be stored in log files. You can also export the log files on your demand. Before you start: Please configure network storage for the camera or insert a SD card in the camera. Steps: 1.

  • Page 77: Chapter 9 Others

    User Manual of Network Fisheye Camera Chapter 9 Others 9.1 Managing User Accounts Enter the User Management interface: Configuration >Basic Configuration> Security > User Or Configuration > Advanced Configuration> Security > User The admin user has access to create, modify or delete other accounts. Up to 15 user accounts can be created.
  • Page 78 User Manual of Network Fisheye Camera Figure 9-2 Add a User  Modify a User Steps: 1. Left-click to select the user from the list and click Modify. 2. Modify the User Name, Level or Password. 3. In the Basic Permission field and Camera Configuration field, you can check or uncheck the permissions.

  • Page 79: Configuring Rtsp Authentication

    User Manual of Network Fisheye Camera  Delete a User Steps: 1. Click to select the user you want to delete and click Delete. 2. Click OK on the pop-up dialogue box to delete the user. 9.2 Configuring RTSP Authentication Purpose: You can specifically secure the stream data of live view.

  • Page 80: Ip Address Filter

    User Manual of Network Fisheye Camera Figure 9-5 Anonymous Visit 2. Set the Anonymous Visit permission Enable or Disable in the drop-down list to enable or disable the anonymous visit. 3. Click Save to save the settings. There will be a checkbox of Anonymous by the next time you logging in. Figure 9-6 Login Interface with an Anonymous Checkbox 4.
  • Page 81 User Manual of Network Fisheye Camera Figure 9-7 IP Address Filter Interface 2. Check the checkbox of Enable IP Address Filter. 3. Select the type of IP Address Filter in the drop-down list, Forbidden and Allowed are selectable. 4. Set the IP Address Filter list. ...

  • Page 82: Security Service

    User Manual of Network Fisheye Camera Figure 9-9 Modify an IP (3) Click the OK to finish modifying.  Delete an IP Address Left-click an IP address from filter list and click Delete.  Delete all IP Addresses Click Clear to delete all the IP addrsses. 5.

  • Page 83: Maintenance

    User Manual of Network Fisheye Camera Configuration > Basic Configuration> System > Device Information Or Configuration > Advanced Configuration> System > Device Information In the Device Information interface, you can edit the Device Name. Other information of the network camera, such as Model, Serial No., Firmware Version, Encoding Version, Number of Channels, Number of HDDs, Number of Alarm Input and Number of Alarm Output are displayed.

  • Page 84: Restoring Default Settings

    User Manual of Network Fisheye Camera 9.7.2 Restoring Default Settings Steps: 1. Enter the Maintenance interface: Configuration > Basic Configuration> System > Maintenance Or Configuration > Advanced Configuration> System > Maintenance 2. Click Restore or Default to restore the default settings. Figure 9-13 Restore Default Settings Note: After restoring the default settings, the IP address is also restored to...

  • Page 85: Upgrading The System

    User Manual of Network Fisheye Camera Figure 9-14 Import/Export Configuration File 9.7.4 Upgrading the System Steps: 1. Enter the Maintenance interface: Configuration > Basic Configuration> System > Maintenance Or Configuration > Advanced Configuration> System > Maintenance 2. Click Browse to select the local upgrade file and then click Upgrade to start remote upgrade.

  • Page 86: Rs-485 Settings

    User Manual of Network Fisheye Camera device will be controlled remotely by the computer through the network. Steps: 1. Enter RS-232 Port Setting interface: Configuration> Advanced Configuration> System > RS232 Figure 9-16 RS-232 Settings Note: If you want to connect the camera by the RS-232 port, the parameters of the RS-232 should be exactly the same with the parameters you configured here.

  • Page 87: Fisheye Parameters

    User Manual of Network Fisheye Camera By default, the Baud Rate is set as 9600 bps, the Data Bit is 8, the stop bit is 1 and the Parity and Flow Control is None. Note: The Baud Rate, PTZ Protocol and PTZ Address parameters should be exactly the same as the PTZ camera parameters.
  • Page 88 User Manual of Network Fisheye Camera selectable on the live view interface: Fisheye View, 4 PTZ Views and Custom. Note: The sub stream is not supported for the channels in Mode 2.  Mode 3: Fisheye (Main Stream) + Fisheye (Sub Stream) + 3 PTZ 4 channels of video stream are available: 1 for Fisheye View and 3 for PTZ View.

  • Page 89: Appendix

    User Manual of Network Fisheye Camera Appendix Appendix 1 SADP Software Introduction  Description of SADP V 2.0 SADP (Search Active Devices Protocol) is a kind of user-friendly and installation-free online device search tool. It searches the active online devices within your subnet and displays the information of the devices.
  • Page 90 User Manual of Network Fisheye Camera  Search online devices manually You can also click Refresh to refresh the online device list manually. The newly searched devices will be added to the list. Note: You can click on each column heading to order the information;...
  • Page 91 User Manual of Network Fisheye Camera 1. Contact our technical engineers to get the serial code. 2. Input the code in the Serial code field and click Confirm to restore the default password.

  • Page 92: Appendix 2 Port Mapping

    User Manual of Network Fisheye Camera Appendix 2 Port Mapping The following settings are for TP-LINK router (TL-WR641G). The settings vary depending on different models of routers. Steps: 1. Select the WAN Connection Type, as shown below: Figure A.2.1 Select the WAN Connection Type 2.
  • Page 93 User Manual of Network Fisheye Camera another camera as 81, 8001, 555, 8201 with IP 192.168.1.24. Refer to the steps as below: Steps: 1. As the settings mentioned above, map the port 80, 8000, 554 and 8200 for the network camera at 192.168.1.23 2.
  • Page 94 User Manual of Network Fisheye Camera...

This manual is also suitable for:

Ds-2cd6362f-ivDs-2cd6362f-isDs-2cd6332fwd-iDs-2cd6332fwd-ivDs-2cd6332fwd-is

Table of Contents