Advertisement
R
epair
< Note > Take off saw blade from the machine for your safety, before repairing or maintenance !
* You can also remove motor section from arm when repairing turn base and base section, if you want.
< 2 > Disassembling slide section
1) Disassemble guide rule from base. Then, take off pan head screw M5 x 12 and flat washer 5.
So, turn base can be disassembled from base as illustrated in Fig. 1.
Arm holder
2) Slide pipe (integrated part of arm holder) can be removed as follows.
1. Remove under cover from the reverse of turn base as illustrated in Fig. 2A.
2. Remove slide guide, slide guide support and slide guide plate by loosening 5 pcs. of hex socket head
bolts M5 x 40. And take off rod from lock ring 30 by loosening hex socket hd. bolt M5 x 6
as illustrated in Fig. 2B.
3. Slide pipe (integrated part of arm holder) can be removed as illustrated in Fig. 2C.
Arm holder
Turn base
Under cover
Fig. 2A
Guide rule
Turn base
Base
( No need to take off hex socket head bolt M5 x 6 from lock ring 30.)
Arm
Fig. 2C
Pan head screw M5 x 12
Flat washer 5
Arm
Fig. 1
Arm holder
Lock ring 30
Rod
Hex socket
hd. bolt M5 x 6
Hex socket
hd. bolt M5 x 40
P 4 / 13
Arm
Slide pipe
Slide guide plate
Slide guide support
Slide guide
Fig. 2B
Advertisement
