Port Range Forward - Samsung SPE-400 User Manual

network connection and setup
3. Click the [Manual Set] button and
check the network device's <Dynamic
IP> address.
If you uncheck <DHCP>, you can
change IP to <Static>.
PORT RANGE FORWARD (PORT MAPPING) SETUP
If you have installed a broadband router with a network video encoder connected, you must set
the port range forwarding on the Broadband router so that a remote PC can access the network
video encoder in it.
Manual Port Range Forwarding
1. From the Setup menu of the Broadband
router, select <Applications &
Gaming> - <Port Range Forward>.
For setting the port range forward for
a third-party Broadband router, refer
to the user guide of that Broadband
router.
2. Select <TCP> and <UDP Port> for
each connected network video encoder
to the Broadband router.
Each port number for the Broadband
Router should match that specified in
<Setup> - <Network> - <Port> from
the encoder's web viewer menu.
3. When done, click [Save Settings].
Your settings will be saved.

M
Above sample instructions are based on the CISCO's Broadband router.

The settings may differ depending on the connected Broadband router model.
For more information, refer to the user manual of the applicable router.
30_ network connection and setup