Before First Use; Daily Use - AEG BP730402K User Manual

10 www.aeg.com
Symbol
4.3 Heat up indicator
If you activate an oven function, the bars
come on in the display. The bars
show that the temperature in the
appliance increases or decreases.

5. BEFORE FIRST USE

WARNING!
Refer to Safety chapters.
5.1 Initial Cleaning
Remove all accessories and removable
shelf supports from the appliance.
Refer to "Care and
cleaning" chapter.
Clean the appliance before first use.
Put the accessories and the removable
shelf supports back to their initial
position.
5.2 Setting the time
After the first connection to the mains, all
symbols in the display are on for some
seconds. For the subsequent few
seconds the display shows the software
version.

6. DAILY USE

WARNING!
Refer to Safety chapters.
Name
Temperature
Core temperature sensor
Door lock
Light
Minute minder
Description
You can change the temperature.
The core temperature sensor is in the
core temperature sensor socket.
The door lock function operates.
You deactivated the light.
The minute minder function operates.
When the appliance is at the set
temperature, the bars go off the display.
After the software version goes off, the
display shows h and 12:00. "12" flashes.
1. Touch or
2. Touch or
3. Touch or
4. Touch or
The Temperature / Time display shows
the new time.
5.3 Changing the time
You can change the time of day only
when the appliance is off.
Touch .
flashes in the display.
To set the new time of day, refer to
"Setting the time".
6.1 Operating the appliance
To operate the appliance you can use:
• the manual mode
• automatic programmes
to set the hours.
.
to set the minutes.
.