Electrostatic-Sensitive Component Label - Cisco C880 M4 Operating Manual

2.Important Notes

2.2. Electrostatic-sensitive Component Label

Electrostatic-sensitive components may be identified by the following sticker:
Figure 1: Electrostatic-sensitive component sticker
You must follow the instructions below when handling modules containing electrostatic-sensitive
components
Discharge static electricity from your body (for example by touching a grounded metal object) before
handling modules containing electrostatic- sensitive components.
The equipment and tools you use must be free of static charge.
Remove the power plug before installing or removing modules containing electrostatic-sensitive
components.
Only hold modules containing electrostatic-sensitive components by their edges.
Do not touch any of the pins or track conductors on a module containing electrostatic-sensitive
components.
Use a grounding strap designed for the purpose, to connect you to the system unit as you install the
modules.
Place all components on a static-safe base.
An exhaustive description of the handling of modules containing electrostatic-sensitive
components can be found in the relevant European and international standards (DIN EN
61340-5-1, ANSI/ESD S20.20).
9