Installation; Installation Steps; Unpacking The Storage Subsystem - Cisco C880 M4 Operating Manual

8.Installation

8. Installation

8.1. Installation Steps

CAUTION!
The storage subsystem should not be subjected to any extreme environmental conditions (see
section "
Technical Data
The following installation steps are described in detail in other sections of this chapter:

Unpacking the storage subsystem.

Inserting the storage subsystem into the rack.
Cabling the storage subsystem (see
Setting the desired system parameters.
Connecting the storage subsystem to the mains voltage (see
Switching ON the storage subsystem.
8.2. Unpacking the Storage Subsystem
CAUTION!
Please note the safety instructions in
Enlist the help of others to carry the storage subsystem.
You should retain the original packing of the storage subsystem for possible further transport.
Unpack all parts.
Check the contents of the package for visible transport damage.
Check whether the delivery matches the information given on the delivery
note.
Check whether the first page of the guarantee booklet has been completed in full.
If you find transport damage or inconsistencies between the contents of the package and the delivery
note, inform your supplier immediately!
" on page
5). Protect it from dust, moisture and heat.
section "
SAS Connection
chapter "
" on page
section "
Mains Connection
" on page
Important Notes
26).
" on page
7.
31
28).