Connections; Sas Connection - Cisco C880 M4 Operating Manual

6. Connections

If you would like to put the storage subsystem into operation, the SAS and the mains connections must be
inserted.

6.1. SAS Connection

The required connections are on the rear panel of the storage subsystem.
SAS Out port
Figure 16: SAS connections
Set up the data connection between the server and the storage subsystem by inserting the plug of
the SAS cable coming from the server into the SAS In port connector of the storage subsystem.
Ensure that the plug engages securely to the SAS connector. Only in this way can the smooth flow of
data between the server and the storage subsystem be guaranteed.
Depending on the type of cable the plugs can be unlocked by pulling a strap or by pressing a lever.
26
SAS In port
Operating Manual
6.1SAS Connection