Table of Contents
Advertisement
Windows 98 Network Configuration
1. From the Windows 98 desktop, click the Start button, select Settings, open
the Control Panel and double-click the Network icon.
2. The Network window will appear. Click the Configuration tab. A window
similar to the one below will appear. There may be other components list-
ed in addition to the ones shown below (for example, a Dial-up Adapter),
which is normal. You will need to manually install one of the protocols list-
ed below. It is recommended that you install TCP/IP and provide an IP
address to use the Internet services.
• Client
for
Microsoft
Networks
• Linksys EtherFast 10/100
Compact USB Network
Adapter
• TCP/IP
For instructions on manually installing these components, refer to
Manually Installing Network Components now. Please note that Linksys
does not provide technical support or troubleshooting for TCP/IP.
11
Instant EtherFast
®
Series
EtherFast
®
10/100 Compact USB Network Adapter
3. Click the File and Print Sharing button. The File and Print Sharing win-
dow will appear.
4. If you'd like others to be able to access the files on your PC's hard drive,
select I want to be able to give others access to my files.
If you'd like to share your printer with other users
on the network, select I want to be able to allow
others to print to my printer.
5. Click the OK button. File and Printer Sharing for
Microsoft Networks should now appear in the list of installed components.
N N o o t t e e : : If you do not enable
File and Print Sharing,
your PC will be invisible
on the network and inac-
cessible to other users.
12
Advertisement
Table of Contents
