Windows Xp Wireless Zero Configuration; Figure 6-3: The Zero Configuration Icon; Figure 6-4: Windows Xp Zero Configuration Connection Without Wep - Linksys WUSB11 User Manual

Wireless-B USB Network Adapter

Windows XP Wireless Zero Configuration

NOTE: Windows XP has a built-in configuration tool. Use Windows XP Wireless Zero Configuration
(in the system tray at the bottom of your screen) to configure the Adapter.
1. After installing the Adapter, the Windows XP Wireless Zero Configuration icon will appear in your computer's
system tray. Double-click the icon.
NOTE: Steps 2 and 3 are the instructions and screenshots for Windows XP with Service Pack 1
installed.
If you have not installed Service Pack 1, select the network you want, and click the Connect
button. If the network has WEP encryption enabled, enter the WEP key in the Network key field,
and then click the Connect button.
2. The screen that appears will show any available wireless network. Select the network you want.
If this network has WEP encryption enabled, go to step 3.
If this network does not have WEP encryption enabled, make sure the box next to Allow me to connect to
the selected wireless network, even though it is not secure is checked. Then click the Connect button,
and go to step 4.
Chapter 6: Driver Installation and Configuration for Windows XP
Windows XP Wireless Zero Configuration

Figure 6-3: The Zero Configuration Icon

Figure 6-4: Windows XP Zero Configuration Connection
without WEP
encryption: encoding data transmitted in a network.
16