Linksys PAP2T User Manual page 13

Internet Phone Adapter with 2 Ports for Voice-over-IP
Interactive Voice Response Menu
Action Command
(press these
keys on the
telephone)
Enable/Disable DHCP 101
Check IP Address 110
Set Static IP Address 111
Check Network Mask 120
(or Subnet Mask)
Set Network Mask (or 121
Subnet Mask)
Check Static Gateway 130
IP Address
Set Static Gateway IP 131
Address
Chapter 4: Using the Phone Adapter's Interactive Voice Response Menu
Using the Interactive Voice Response Menu
Choices Description
Enter 1 to enable Enable or disable the Phone Adapter's
Enter 0 to disable DHCP feature. If your network router
assigns IP addresses, enter 1,
otherwise, enter 0.
— Use this command to check the
current IP address of the Phone
Adapter.
Enter the IP address To set a static IP address, the DHCP
using the numbers on feature must be disabled. If the DHCP
your telephone feature is enabled, you will hear,
keypad. Use the "Invalid Option," if you try to set a
* (star) key to enter a static IP address.
decimal point.
— Use this command to check the
current network mask of the Phone
Adapter.
Enter the network To set the network mask, the DHCP
mask using numbers feature must be disabled. If the DHCP
on your telephone feature is enabled, you will hear,
keypad. Use the "Invalid Option," if you try to set the
* (star) key to enter a network mask.
decimal point.
— Use this command to check the
current gateway IP address of the
Phone Adapter.
Enter the IP address To set a static gateway IP address, the
using numbers on DHCP feature must be disabled. If the
your telephone DHCP feature is enabled, you will hear,
keypad. Use the "Invalid Option," if you try to set a
* (star) key to enter a static gateway IP address.
decimal point.
9