Ethernet Ring Protection Switching (Erps) Commands - D-Link Dis-200G Series Cli Reference Manual

11. Ethernet Ring Protection Switching (ERPS)
Commands
11-1 description
This command is used to configure the description for Ethernet Ring Protection (ERP) instances.
description DESCRIPTION
Parameters
None.
Default
None.
Command Mode
ERP Instance Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
This command is used to configure the description for the ERP instances.
Example
This example shows how to configure the description for the ERP instances.
Switch# configure terminal
Switch(config)# ethernet ring g8032 major-ring
Switch(config-erp)#instance 1
Switch(config-erp-instance)#description custom-description
Switch(config-erp-instance)#
11-2 ethernet ring g8032
This command is used to create or modify an ITU-T G.8032 ERP physical ring and enter the ERP configuration
mode. Use the no form of this command to delete the specified ring.
ethernet ring g8032 RING-NAME
no ethernet ring g8032 RING -NAME
Parameters
RING-NAME
Default
DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
Specifies the name of the ERP ring with the maximum of 32
characters.
46