Makita 2702X1 Instruction Manual page 5

17.
Avoid abrupt, fast feeding. Feed as slowly as possible when cutting hard
workpieces.
Do
not bend or t w i s t workpiece while feeding. If you stall or
jam the blade in the workpiece, turn the tool off immediately. Unplug the
tool. Then clear the jam.
18.
Never remove cut-off pieces near the blade or touch the blade guard while
the blade is running.
19.
Don't abuse cord. Never yank cord t o disconnect from receptacle. Keep cord
away from heat, oil, water and sharp edges.
SAVE THESE INSTRUCTIONS.
5