Kenwood DDX9902S Instruction Manual page 69

CONNECTION/INSTALLATION CONNECTION/INSTALLATION
Connecting the Miracast Dongle to
use smartphone/iPod/iPhone over a
wireless connection
Miracast Dongle: KCA-WL100
(optional accessory)
Connecting external components
1 AV-OUT/Video output (Yellow)
2 Rear view camera input (Yellow)
3 Audio Video input (AV-IN1)*
1
4 iPod/Audio Video input (iPod/AV-IN2)*
5 iDatalink input for connecting ADS adapter
(commercially available)
6 HDMI/MHL input
7 Subwoofer preout (monaural output)*
• Subwoofer left output (White)
• Subwoofer right output (Red)
8 Rear preout*
2
• Audio left output (White)
• Audio right output (Red)
9 Front preout*
2
• Audio left output (White)
• Audio right output (Red)
p Audio output (ø3.5 mini jack)
Resistance-free stereo type mini plug
q Expansion port for connecting SiriusXM Connect
Vehicle Tuner (commercially available)
1
* When connecting the component to play on "AV-IN1" or "AV-
IN2", use the Audio and Video cable CA-C3AV (optional accessory).
2
* When connecting an external amplifier, connect its ground wire to
the chassis of the car; otherwise the unit may be damaged.
Connecting microphone for Bluetooth
Connect the microphone (7) to the MIC terminal.
• To install the microphone, peel off the adhesive
1
tape, fix it on the installation position, then adjust
the direction of the microphone to face the driver.
After installing, fix the microphone cable to the car
with clamps (commercially available).
2
7
ENGLISH 69