Table of Contents
Advertisement
Mounting the Portable
Tuner
Mount the WRR-861A/861B UHF portable diversity tuner
of the wireless microphone system.
Mounting the WRR-861A/861B
(Example)
1
(1) Attach the mount bracket (not supplied) to the
back panel of this unit.
A Pass a screwdriver through the holes and tighten
the screws.
B Loosen the adjustment screws.
C Adjust the metal fitting position for the battery
pack to be attached, and tighten the adjustment
screws to fix its position.
D Attach the mount plate supplied with the WRR-
861A/861B.
(2) Attach the battery pack.
For more information about attaching the battery
pack, see "Operating on the Battery Pack" on page
14.
(1) Mount bracket
(2) Battery pack
Adjustment screws
Mount plate
(supplied with the
WRR-861A/861B)
2
Mount the tuner on the mount plate.
3
Connect the tuner connecting cord to the output cord,
and external power cord of the tuner, and to the DC
OUT connector of this unit.
DC OUT
External power cord
(supplied with the
WRR-861A/861B)
For information on where to obtain a tuner connecting
cord, please contact your Sony service representative.
WRR-861A/861B
Output cord
(supplied with the
WRR-861A/861B)
Tuner connecting cord
13
Mounting the Portable Tuner
Advertisement
Table of Contents
